Mean Well SPD-20HP-277S Protector contra sobretensiones AC para iluminación LED, 20 kA, IP66

The SPD-20HP-277S from Mean Well is a dedicated AC surge protection device engineered specifically for LED lighting and outdoor applications. Unlike generic protectors, it combines a high 20 kA maximum discharge current with an IP66-rated enclosure, making it suitable for direct exposure to harsh weather conditions. The unit operates on a 277 VAC line, a common voltage in commercial and industrial lighting circuits, and provides comprehensive protection across all three modes: line-to-neutral, line-to-ground, and neutral-to-ground.

Highlights

• Maximum discharge current (Imax): 20 kA (8/20 μs)
• Nominal discharge current (In): 10 kA (8/20 μs)
• Maximum continuous operating voltage (Uc): 277 VAC
• Voltage protection level (Up): ≤ 1.5 kV
• Response time: < 25 ns
• IP66 ingress protection for outdoor use
• LED status indication (green = normal, off = fault)
• Flame-retardant enclosure (UL94V-0)
• Parallel wiring connection
• Complies with IEC 61643-11, UL 1449 4th Ed., EN 61643-11

In daily use

Installed in parallel with the lighting circuit, the SPD-20HP-277S continuously monitors for transient overvoltages. When a surge occurs, it diverts the excess energy to ground within nanoseconds, protecting downstream LED drivers and fixtures. The built-in LED provides at-a-glance status: a green light indicates the protection is active, while an off light signals a fault and the need for replacement. The wide operating temperature range from -40°C to +85°C ensures reliable performance in extreme climates, from freezing winters to hot summers.

Full specifications

• Product type: AC Surge Protection Device (SPD)
• Application: LED lighting, outdoor lighting, street lights
• SPD type: Type 2 (IEC) / Type 4 Component Assembly (UL)
• Protection mode: L-N, L-G, N-G
• Short-circuit current rating (SCCR): 10 kA
• Enclosure material: UL94V-0 flame retardant

Final note

The SPD-20HP-277S is a robust choice for protecting outdoor LED lighting installations from lightning-induced surges and switching transients, ensuring long-term reliability of the lighting system.