Módulo transceptor de fibra óptica BlueOptics 2779110000-BO 10000 Mbit/s SFP+

The BlueOptics 2779110000-BO 10000 Mbit/s SFP+ is a fiber optic transceiver module designed for high-speed network links. As an SFP+ form factor module, it supports a maximum data transfer rate of 10,000 Mbit/s and is supplied in a compact, silver enclosure weighing 20 g. The module is intended for insertion into compatible SFP+ ports on switches, routers and host network adapters and offers an MTBF of 1,000,000 hours. It meets CE, FCC and RoHS conformity requirements for safe and compliant deployment in commercial and industrial network environments.

Advantages

The SFP+ form factor provides a compact, hot-pluggable solution that simplifies upgrades and maintenance. With a specified maximum data transfer rate of 10,000 Mbit/s the module supports 10 Gigabit Ethernet links and bandwidth-intensive applications. Its light silver enclosure and 20 g weight make it suitable for dense installations where space and weight are constrained. The cited MTBF of 1,000,000 hours indicates long operational life under normal conditions, and compliance with CE, FCC and RoHS standards supports regulatory compatibility.

Suitable for

• 10 Gigabit Ethernet uplinks and inter-switch connections
• High-speed links between servers and storage systems
• Data center and campus network aggregation
• Network hardware that accepts SFP+ transceiver modules

Key specifications

• Form factor: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Weight: 0.02 kg (20 g)
• Product colour: Silver
• Mean time between failures (MTBF): 1,000,000 hours
• Regulatory compliance: CE, FCC, RoHS

How to use

Install the transceiver by aligning and inserting the module into a compatible SFP+ port on your network switch, router or host adapter until it latches. Connect an appropriate fiber optic cable with matching connectors to the transceiver’s optical interface. Confirm link status and configuration on the network device; adjust port speed and duplex settings if required by the device firmware. For hot-swap operations, remove and replace the module while the host remains powered only if the host supports hot-pluggable transceivers.

Recommendations

Use multimode or single-mode fiber and connector types that match the transceiver’s optical specifications and the distance required for your link. Ensure devices are powered down or support hot-plugging before insertion or removal, and follow antistatic handling procedures. Verify compliance with network equipment vendor compatibility lists when deploying third-party SFP+ transceivers.