Módulo transceptor de fibra óptica BlueOptics 37973134-BO 10000 Mbit/s SFP+

The BlueOptics 37973134-BO 10000 Mbit/s SFP+ fiber optic transceiver module is a compact hot-pluggable interface designed for 10 Gbit/s network links. With an SFP+ form factor and silver housing, the module supports a maximum data transfer rate of 10000 Mbit/s and is intended for integration into switches, routers and optical equipment that accept SFP+ optics. The design emphasizes reliability with a high mean time between failures (MTBF) of 1,000,000 hours and conformity to CE, FCC and RoHS standards.

Advantages

The module offers a standardized SFP+ interface for straightforward insertion and removal from compatible ports without powering down equipment. Its compact dimensions and lightweight metal housing facilitate installation in densely populated rack systems and small form-factor devices. Compliance with CE, FCC and RoHS ensures regulatory compatibility for many commercial and industrial deployments, while the high MTBF reflects long operational life under normal conditions.

Suitable for

• 10 Gbit/s uplinks between switches and routers
• High-speed server connections in data center environments
• Fiber-based links in enterprise network aggregation and distribution
• Replacement or upgrade of existing SFP+ optical ports

Key specifications

• Form factor: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Housing colour: Silver
• Weight: 0.02 kg
• Mean Time Between Failures (MTBF): 1,000,000 hours
• Regulatory compliance: CE, FCC, RoHS

How to use

Install the BlueOptics SFP+ transceiver by aligning the module with an empty SFP+ slot and gently inserting it until it latches. Connect an appropriate fiber optic patch cable and ensure the opposite endpoint uses a compatible transceiver or connector. Confirm link status via the host device’s management interface or indicator LEDs. Remove the module by releasing the latch and pulling it straight out; observe ESD precautions when handling the optical interface and protective caps should be used when the module is not connected.

Recommendations

Use certified single-mode or multimode fiber and matching connectors recommended by the system vendor, and verify transceiver compatibility with the host equipment. Maintain clean fiber endfaces and store the transceiver with protective caps when not in use to preserve optical performance and reliability.