Módulo transceptor de fibra óptica BlueOptics SFP992-1LD-BO 10000 m aluminio

The BlueOptics SFP992-1LD-BO 10000 m Aluminium is a fiber optic SFP transceiver module designed for single-mode optical links up to 10,000 m. Housed in an aluminium casing and weighing approximately 20 g, this SFP module provides a compact solution for standardized SFP ports with an LC duplex connector. It supports 1000BASE-LX operation with separate transmitter and receiver wavelengths (1310 nm) and follows MSA-compatible form factor and signalling conventions for wide interoperability.

Advantages

The aluminium housing offers mechanical robustness and effective thermal dissipation while keeping the module lightweight. Compliance with MSA standards ensures physical and electrical compatibility with a broad range of network equipment that accepts SFP modules. The single-mode design and 1310 nm optical interface are suitable for long-reach 1000BASE-LX links, and the LC duplex connector provides simultaneous transmit and receive channels on two fibers. Modules from this family are factory tested for interoperability and manufactured using quality optical and electronic components to achieve stable long-term operation.

Suitable for

Key specifications

How to use

Insert the SFP992-1LD-BO into a compatible SFP slot on your switch, router or storage device while the host equipment is powered according to the vendor’s guidance. Connect LC duplex single-mode patch cables to the module’s LC ports, ensuring transmit and receive fibers are correctly oriented. Verify link status on the host device and consult the device’s interface settings to confirm 1000BASE-LX operation. If the host supports digital diagnostics (DDM/DOM), enable or query the diagnostics interface to monitor supply voltage, laser bias current, optical output/input power and temperature.

Recommendations

For reliable long-reach links, use quality single-mode LC patch cords and keep connectors clean. Confirm host compatibility with MSA-standard SFP modules and, if required by the hardware vendor, test interoperability before large-scale deployment. If monitoring is needed, ensure the host platform supports DDM/DOM to access real-time diagnostic parameters.