Módulo transceptor de red BlueOptics AC-SFP+-SM-40-BO 10000 Mbit/s SFP+ 1550 nm

The BlueOptics AC-SFP+-SM-40-BO network transceiver module provides a compact SFP+ solution for single-mode fiber links at 10 Gbit/s. Designed for use in switches, routers and media converters, this module supports a 1550 nm wavelength and offers a small silver form factor that fits standard SFP+ ports. Built to meet CE, FCC and RoHS compliance, the transceiver is specified with a long mean time between failures for stable operation in network environments.

Advantages

The module supports a 10000 Mbit/s data rate over single-mode fiber using a 1550 nm wavelength, enabling long-reach optical links with low latency. Its SFP+ interface ensures hot-pluggable installation in compatible network equipment, while the compact silver housing is compatible with standard SFP+ cages. Compliance with CE, FCC and RoHS standards provides regulatory conformity for commercial and industrial deployments. The specified mean time between failures of 3,000,000 hours indicates extended operational life and reliability.

Suitable for

• 10 Gigabit Ethernet uplinks and inter-switch connections
• Long-reach single-mode fiber connections in campus and metropolitan networks
• Data center aggregation links and server connectivity
• Equipment requiring hot-pluggable SFP+ transceivers

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Optical wavelength: 1550 nm for single-mode fiber
• Form factor: SFP+ hot-pluggable module
• Product colour: Silver
• Weight: 0.02 kg
• Standards compliance: CE, FCC, RoHS
• Reliability: Mean time between failures ~3,000,000 hours

How to use

Insert the BlueOptics SFP+ transceiver into a compatible SFP+ slot on your network device while the device is powered according to the equipment vendor guidance for hot-plug operations. Ensure the fiber cable and connectors match single-mode specifications and the module's 1550 nm wavelength. After physical installation, verify link status through the switch or router management interface and configure relevant port settings such as speed, duplex and VLANs as required by your network design.

Recommendations

Handle the transceiver by the housing and keep dust caps on fiber ports until connection to prevent contamination. Use single-mode fiber rated for 1550 nm and verify optical power budgets for the intended link distance. Confirm compatibility with the host device firmware and follow electrostatic discharge (ESD) precautions during installation.