Módulo transceptor SFP+ BlueOptics 1AB410040001-BO 10000 Mbit/s fibra óptica

The BlueOptics 1AB410040001-BO is an SFP+ fiber optic transceiver module designed for 10 Gbit/s network links. Housed in a compact silver SFP+ form factor, this module supports a maximum data transfer rate of 10000 Mbit/s and is intended for use in compatible switches, routers and optical equipment. The product is compliant with CE, FCC and RoHS standards and specifies a mean time between failures (MTBF) of 1,000,000 hours, reflecting expected long-term reliability when deployed in standard operating conditions.

Advantages

This SFP+ transceiver combines a small form factor with support for 10 Gbit/s throughput, enabling high-speed fiber connections in dense networking environments. Its silver metal housing provides mechanical durability and helps with heat dissipation. Compliance with widely recognized safety and environmental standards ensures interoperability and regulatory conformity across many installations. The specified MTBF gives a clear indicator of expected service life for planning and maintenance.

Suitable for

• 10 Gbit/s uplinks between switches and core network equipment
• High-speed server-to-switch connections in data centers
• Fiber backbone links in campus and enterprise networks
• Upgrading SFP+ ports to support optical connections

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Form factor: SFP+ compact transceiver
• Product colour: Silver
• Weight: 0.02 kg
• Compliance: CE, FCC, RoHS
• Reliability: MTBF 1,000,000 hours

How to use

Insert the transceiver into a compatible SFP+ port on your network device until it latches securely. Connect appropriate single-mode or multimode fiber optic cables to the transceiver’s optical interface, ensuring correct cable type and connector polishing for the intended link distance and network design. After physical installation, verify link status and speed through the host device’s management interface and monitor error counters to confirm proper operation.

Recommendations

Handle the module by its metal housing and avoid touching the optical connector endface. Use protective dust caps when the transceiver is not connected and follow manufacturer guidance for fiber type and maximum supported distance. For best results, validate compatibility with your switch or router vendor and keep firmware or driver recommendations up to date.