Módulo transceptor SFP+ BlueOptics ALL4757 10000 Mbit/s 850 nm

The BlueOptics ALL4757 SFP+ transceiver module is a compact fiber optic interface designed for 10 Gbit/s networks. It supports a maximum data transfer rate of 10000 Mbit/s and operates at an 850 nm wavelength, suitable for short-range multimode fiber links. The module’s silver housing and 20 g weight make it lightweight and easy to handle during installation in compatible SFP+ ports.

Advantages

The module provides a standardized SFP+ interface for straightforward integration into existing network equipment. Its 850 nm wavelength is optimized for multimode fiber deployments and supports high-speed data transmission up to 10000 Mbit/s. The compact form factor and low weight reduce physical strain on equipment bays and simplify hot-swap installation. The product is designed for interoperability with devices that accept SFP+ transceivers.

Suitable for

• Short-range multimode fiber connections in data centers
• Server-to-switch and switch-to-switch 10 Gbit/s links
• Upgrading network ports to 10 Gbit/s capacity
• Environments where a compact SFP+ transceiver is required

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Operating wavelength: 850 nm
• Form factor: compact SFP+ transceiver
• Colour: silver
• Weight: approximately 0.02 kg

How to use

Ensure the network equipment supports SFP+ transceivers and that the connected multimode fiber is compatible with an 850 nm wavelength. Power down or follow the device manufacturer’s hot-swap instructions before inserting the transceiver into an empty SFP+ slot. Securely connect the fiber optic cable to the transceiver’s optical interface and verify link status via the host device’s network management interface. If required, configure port settings such as speed and duplex according to the network design.

Recommendations

Handle the optical connector with care to avoid contamination. Use dust caps when the transceiver is not connected, and clean fiber endfaces before mating. For best performance, use multimode fiber appropriate for 850 nm operation and verify link budgets and distance limits for your cabling. Follow the host equipment vendor guidelines for firmware and compatibility lists.