Cuenta Contacto
Tu carrito
Envío con DPD y FedEx
¿Dudas? Pregunte a la IA

Módulo transceptor SFP BlueOptics EB48-BO cobre 1250 Mbit/s RJ-45

Módulo transceptor SFP BlueOptics EB48-BO cobre 1250 Mbit/s RJ-45
Módulo transceptor SFP BlueOptics EB48-BO cobre 1250 Mbit/s RJ-45
Módulo transceptor SFP BlueOptics EB48-BO cobre 1250 Mbit/s RJ-45
Módulo transceptor SFP BlueOptics EB48-BO cobre 1250 Mbit/s RJ-45
Módulo transceptor SFP BlueOptics EB48-BO cobre 1250 Mbit/s RJ-45
Módulo transceptor SFP BlueOptics EB48-BO cobre 1250 Mbit/s RJ-45
Módulo transceptor SFP BlueOptics EB48-BO cobre 1250 Mbit/s RJ-45
Módulo transceptor SFP BlueOptics EB48-BO cobre 1250 Mbit/s RJ-45
Módulo transceptor SFP BlueOptics EB48-BO cobre 1250 Mbit/s RJ-45
Módulo transceptor SFP BlueOptics EB48-BO cobre 1250 Mbit/s RJ-45
69,39 €
The BlueOptics EB48-BO Copper SFP transceiver module is a compact network interface designed for 1250 Mbit/s copper connections with an RJ-45 connector. Built in an industry-standard SFP form factor, this module enables 1000BASE-T class data transmission in devices with SFP slots. It is lightweight ... Leer más
Stock 517 Código 1473374 Marca BLUEOPTICS Modelo EB48-BO Garantía 2 años

Envíos y devoluciones

Entrega estimada Viernes, Octubre 23
Te mantendremos informado a través de nuestro sistema de seguimiento detallado
Opciones de pago
Tarjeta bancariaVisaMastercardPayPalApple PayGoogle PayTransferencia bancaria

The BlueOptics EB48-BO Copper SFP transceiver module is a compact network interface designed for 1250 Mbit/s copper connections with an RJ-45 connector. Built in an industry-standard SFP form factor, this module enables 1000BASE-T class data transmission in devices with SFP slots. It is lightweight at approximately 20 g and offers a high MTBF of around 3,000,000 hours, providing a reliable physical layer option for network equipment that requires a copper RJ-45 SFP solution.

Advantages

The EB48-BO provides a standardized SFP solution with RJ-45 connectivity that is compatible with common hardware platforms supporting 1000BASE-T via SFP. Its compact SFP form factor simplifies installation and hot-swap replacement in switches, routers and storage systems. With a rated maximum data transfer rate of 1250 Mbit/s and a long MTBF, the module supports sustained gigabit copper links while maintaining low weight and a silver finish that integrates with server and network equipment racks.

Suitable for

Key specifications

How to use

Insert the BlueOptics EB48-BO module into an empty SFP slot on a compatible network device while the device is powered according to the device manufacturer's instructions or support hot-swap if supported. Connect a standard Cat5e/Cat6 copper Ethernet cable to the RJ-45 port on the module and to the corresponding network endpoint. Configure the device's network interface settings as required for speed, duplex and link negotiation; the module supports gigabit operation in 1000BASE-T capable ports. Monitor link status LEDs on the host device to confirm successful link establishment.

Recommendations

Use the EB48-BO in environments that require short to medium copper links and ensure the host device supports RJ-45 SFP transceivers. For best performance, use quality Ethernet cables (Cat5e or higher) and follow ESD precautions when handling the module. Verify firmware or compatibility lists of your network hardware if the vendor publishes supported SFP modules.

Aspectos destacados
  • Gigabit copper uplinks in switches and routers
  • Replacing or adding RJ-45 SFP ports in storage systems and load balancers
  • Network hardware platforms that accept SFP copper transceivers
  • Short-reach copper connections inside data centers and wiring closets
  • Interface type: RJ-45 copper
  • Maximum data transfer rate: 1250 Mbit/s
  • Form factor: SFP (small form-factor pluggable)
  • Weight: approximately 0.02 kg
  • Product colour: silver
  • Mean time between failures (MTBF): approximately 3,000,000 hours
Especificaciones
Color del producto
Silver
Compatible con fibra multimodo (MMF)
Yes
Conector de fibra óptica
LC
Distancia máxima de transmisión
100 m
Formato
SFP
Manual
Yes
Número de productos incluidos
1 pc(s)
Periodo de garantía
5 year(s)
Peso
0.02 kg
Peso del embalaje
30 g
Tecnología de cableado Ethernet de fibra
1000BASE
Temperatura de funcionamiento (T-T)
0 - 70
Temperatura máxima de funcionamiento
70 °C
Tiempo medio entre fallos (MTBF)
3000000 h
Tipo de interfaz
RJ-45
Tipo de transceptor SFP
Copper
Velocidad máxima de transferencia de datos
1250 Mbit/s

Folleto

Abrir documento

Documento

Abrir documento
Historial de precios de los últimos 6 meses
Módulo transceptor SFP BlueOptics EB48-BO cobre 1250 Mbit/s RJ-45
Actual
69,39 €
Mínimo
68,39 €
Máximo
69,39 €
Variación 24 h
+0,83 €   +1%
Semana
+0,97 €   +1%
Mes
—   

Productos populares en esta categoría

Hola, soy el asistente de IA de DistriNode. Puedo ayudarte a encontrar productos, comparar opciones, crear presupuestos en PDF o abrir solicitudes de soporte.