Módulo transceptor SFP+ BlueOptics J9153A-BO 10.000 Mbit/s 1550 nm

The BlueOptics J9153A-BO SFP+ transceiver module delivers a 10 Gbit/s fiber optic connection over a 1550 nm wavelength. Designed for compatibility with HP networking equipment, the module uses an SFP+ interface and a stainless steel housing to provide a durable, compact solution for high-speed uplinks, server connections, and switch-to-switch links. The module supports single-mode fiber transmission at long reach distances typical for 1550 nm optics and is intended for integration into existing fiber networks where reliable 10 Gbit/s links are required.

Advantages

The stainless steel construction offers mechanical robustness and corrosion resistance suitable for rack-mounted and data center environments. The SFP+ form factor ensures broad compatibility with 10 Gbit/s ports while occupying minimal space. Operating at 1550 nm enables longer transmission distances on single-mode fiber compared with shorter wavelengths, supporting backbone and campus links. The module’s rated 10000 Mbit/s throughput meets standard 10G Ethernet and Fibre Channel requirements for high-bandwidth applications.

Suitable for

Key specifications

How to use

Install the transceiver into a compatible SFP+ port until it seats securely, observing electrostatic discharge precautions. Connect a single-mode fiber cable with appropriate connectors to the transceiver, maintaining correct transmit/receive orientation. Configure the host device for 10 Gbit/s operation if required and verify link status through the network equipment’s management interface. During installation and maintenance, handle the fiber ends and optical surfaces carefully to avoid contamination and damage.

Recommendations

Use clean, inspected single-mode fiber and compatible connectors to ensure optimal signal quality. Verify device compatibility with HP equipment firmware requirements and confirm link parameters after installation. Store the module in a dry, dust-free environment when not in use and avoid exposing the optical port to direct sunlight or contaminants.