Módulo transceptor SFP BlueOptics MOD-SFP-10G-LR-BO 10000 Mbit/s 1310 nm

The BlueOptics MOD-SFP-10G-LR-BO is a 10 Gbps SFP+ fiber optic transceiver module designed for single-mode links using a 1310 nm wavelength. Housed in a durable metal enclosure and weighing approximately 20 g, this compact module supports long-reach optical connections up to 10,000 m and uses an LC connector for reliable fiber coupling. The module is intended for integration into switches, routers and media converters that accept SFP/SFP+ form-factor transceivers.

Advantages

The module provides a stable 10000 Mbit/s data rate over single-mode fiber with a long maximum reach of 10,000 m while maintaining a compact, low‑weight metal construction that supports heat dissipation and mechanical protection. The LC connector ensures standard compatibility with single‑mode fiber patching, and the silver metal housing is compatible with common SFP/SFP+ cages and cages with hot‑swap capability.

Suitable for

Key specifications

How to use

Insert the transceiver into a compatible SFP/SFP+ slot on your network device following the manufacturer's hot‑swap procedures if available. Connect an LC-terminated single‑mode fiber patch cord to the module, ensuring correct TX/RX orientation. Configure the device port for 10 Gbps operation if required and verify link status through the device management interface or LED indicators. Handle the module by the housing and avoid touching the optical interface; use protective caps when the module is not connected.

Recommendations

Use single‑mode fiber rated for long‑reach applications and maintain clean LC connectors to prevent signal loss. Ensure the host device supports 10 Gbps SFP/SFP+ optics and check firmware or compatibility lists if needed. Store unused modules in anti‑static packaging and avoid exposure to extreme temperatures or mechanical shock.