Cuenta Contacto
Tu carrito
Envío con DPD y FedEx
¿Dudas? Pregunte a la IA

Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm

Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
65,46 €
The BlueOptics SFP-10G-LR-X is a fiber optic SFP+ transceiver module engineered for high-speed data transfer up to 10000 Mbit/s. Operating at a wavelength of 1310 nm, this module supports long-distance optical links and is suitable for use in data centers, aggregation switches, and enterprise networ... Leer más
Stock 2679 Código 1483096 Marca BLUEOPTICS Modelo SFP-10G-LR-X-BO Garantía 2 años

Envíos y devoluciones

Entrega estimada Viernes, Octubre 30
Te mantendremos informado a través de nuestro sistema de seguimiento detallado
Opciones de pago
Tarjeta bancariaVisaMastercardPayPalApple PayGoogle PayTransferencia bancaria

The BlueOptics SFP-10G-LR-X is a fiber optic SFP+ transceiver module engineered for high-speed data transfer up to 10000 Mbit/s. Operating at a wavelength of 1310 nm, this module supports long-distance optical links and is suitable for use in data centers, aggregation switches, and enterprise networks. The module conforms to standard SFP+ form factor and fits into compatible SFP+ ports to provide a reliable physical layer interface for 10 Gigabit Ethernet and other high-bandwidth applications.

Advantages

The transceiver provides a compact SFP+ form factor with a maximum data transfer rate of 10000 Mbit/s and single-mode fiber support at 1310 nm wavelength, enabling extended reach. It offers interoperability with a wide range of networking equipment that accept standard SFP+ modules, facilitating flexible deployment and straightforward upgrades. The module is designed for stable optical performance over long distances while maintaining low latency suitable for demanding network traffic.

Suitable for

Key specifications

How to use

Install the BlueOptics SFP-10G-LR-X by inserting the transceiver into an available SFP+ port on compatible networking equipment until it latches. Connect the appropriate single-mode optical fiber cable with matching connectors to the transceiver’s optical interface. Ensure port settings and link speeds on the switch or router are configured for 10 Gigabit operation. Monitor link status indicators on the device and verify optical link parameters through management interfaces as needed.

Recommendations

Before installation, verify compatibility with your switch or router and confirm that fiber type, connector type, and link budget meet your deployment requirements. Use certified single-mode fiber and check optical power budgets for long-distance runs. Handle the optical ports and connectors with care to avoid contamination — keep protective caps on when not in use and clean connectors according to established procedures.

Aspectos destacados
  • 10 Gigabit Ethernet links between switches and routers
  • Long-distance single-mode fiber connections in metro or campus networks
  • Data center uplinks and aggregation ports
  • Network equipment requiring SFP+ form-factor transceivers
  • Interface type: SFP+
  • Maximum data transfer rate: 10000 Mbit/s
  • Operating wavelength: 1310 nm
  • Form factor: SFP+ optical transceiver
  • Media type: single-mode fiber (optical)
Especificaciones
Cantidad por paquete
1 pc(s)
Compatible con fibra monomodo (SMF)
Yes
Conector de fibra óptica
LC
Distancia máxima de transmisión
10000 m
Ethernet LAN
Yes
Longitud de onda
1310 nm
Longitud de onda de recepción (máx.)
1310 nm
Longitud de onda de transmisión (máx.)
1310 nm
Sistema dúplex
Full
Tecnología de cableado Ethernet de fibra
10GBASE
Tipo de interfaz
SFP+
Tipo de interfaz Ethernet
10 Gigabit Ethernet
Tipo de transceptor SFP
Fiber optic
Velocidad máxima de transferencia de datos
10000 Mbit/s
Historial de precios de los últimos 6 meses
Módulo transceptor SFP BlueOptics SFP-10G-LR-X 10000 Mbit/s 1310 nm
Actual
65,46 €
Mínimo
64,74 €
Máximo
70,43 €
Variación 24 h
+0,59 €   +1%
Semana
+0,28 €   +0%
Mes
-0,26 €   0%

Productos populares en esta categoría

Vendedor: UAB KUR LT · Laisvės pr. 125A, LT-06118 Vilna, Lituania · Código de empresa 303192950 · NIF-IVA UE LT100008198612 · Envío desde la UE (Lituania)
Hola, soy el asistente de IA de DistriNode. Puedo ayudarte a encontrar productos, comparar opciones, crear presupuestos en PDF o abrir solicitudes de soporte.