Módulo transceptor SFP BlueOptics SFP-10G-SR-CI 10000 Mbit/s SFP+ 850 nm

The BlueOptics SFP-10G-SR-CI is a 10 Gbit/s SFP+ fiber optic transceiver module engineered for short-range multimode links. Operating at an 850 nm wavelength, this compact module supports a maximum data transfer rate of 10000 Mbit/s and fits standard SFP+ ports. It is intended for installation in switches, routers and optical equipment that accept SFP+ form-factor transceivers and provides a cost-effective solution for high-bandwidth connections within data centers and enterprise networks.

Advantages

The module offers a small form factor compatible with SFP+ slots and supports 10 Gbit/s data rates over multimode fiber at 850 nm. Its design focuses on reliable short-range transmission, low power consumption and straightforward hot-pluggable installation. Compatibility with common SFP+ ports ensures easy integration into existing network infrastructures without the need for proprietary adapters.

Suitable for

• Short-range 10 Gigabit Ethernet links in data centers
• Server-to-switch and switch-to-switch connections over multimode fiber
• High-bandwidth uplinks within enterprise LANs
• Network equipment requiring standard SFP+ optical transceivers

Key specifications

• Interface type: SFP+
• Maximum data transfer rate: 10000 Mbit/s (10 Gbit/s)
• Optical wavelength: 850 nm
• Form factor: SFP+ optical transceiver
• Application range: short-range multimode fiber links

How to use

Ensure the host device supports SFP+ transceivers and is powered down or in an appropriate state for hot-plugging. Insert the BlueOptics SFP-10G-SR-CI module firmly into the SFP+ slot until it clicks into place. Connect multimode fiber patch cables with compatible connectors to the module’s optical port, observing proper polarity. After insertion, verify link status and configuration on the host device and configure network settings as required. For removal, unlock the carrier latch and pull the module straight out to avoid damaging the connector.

Recommendations

Use high-quality OM3/OM4 multimode fiber for best performance at 10 Gbit/s over short distances. Avoid excessive bending of fiber cables close to the transceiver and keep dust caps on unused ports to protect the optical interface. Confirm host compatibility with SFP+ transceivers and verify firmware or vendor interoperability notes where applicable.