Módulo transceptor SFP BlueOptics SFP-GSX-LC-AE-BO fibra óptica 550m

The BlueOptics SFP-GSX-LC-AE-BO is a single‑port fiber optic SFP transceiver module designed for 1000Base-SX applications. It uses LC duplex connectors and transmits and receives optical signals over multimode fiber at 850 nm, providing reliable data transmission up to 550 metres. Constructed with an aluminium housing and weighing approximately 20 g, the module is compatible with MSA-compliant SFP slots and intended for use in network equipment that supports 1000Base-SX SFP transceivers.

Advantages

The module supports gigabit optical links with simultaneous transmit and receive channels via the LC duplex interface, offering immunity to electromagnetic interference compared with copper connections. Its compact SFP form factor and aluminium housing provide compatibility with a wide range of switches, routers and storage systems while keeping weight and space requirements low. The design follows MSA standards to ensure interoperability with standard SFP ports and typical network platforms.

Suitable for

• Short-reach gigabit Ethernet links over multimode fiber
• Interconnecting switches and routers within data centres and wiring closets
• Optical uplinks between network equipment and patch panels
• Fibre Channel over Ethernet or SDH/SONET applications up to 1.25 Gbit/s

Key specifications

• Form factor: SFP (small form-factor pluggable)
• Data rate: up to 1.25 Gbit/s (1000Base-SX compatible)
• Wavelength: 850 nm (transmit and receive)
• Maximum transmission distance: up to 550 m over multimode fiber
• Connector type: LC duplex
• Housing material and colour: aluminium
• Weight: approximately 0.02 kg

How to use

Insert the BlueOptics SFP-GSX-LC-AE-BO into an empty SFP slot of compatible network equipment while the host device is powered according to the vendor’s instructions. Connect an appropriate multimode LC duplex patch cable between this transceiver and the remote transceiver or patch panel, ensuring correct transmit/receive alignment. Verify link status in the host device interface and, if available, enable Digital Diagnostic Monitoring (DDM/DOM) in the hardware to read real‑time parameters such as supply voltage, laser output and input power, and temperature when supported by the system.

Recommendations

Use multimode fiber and LC duplex patch cords rated for 850 nm to achieve the specified 550 m range. Ensure the host device supports 1000Base-SX SFP transceivers and, if DDM/DOM monitoring is required, confirm the platform exposes these diagnostics. Handle the module by the edges, keep dust caps on unused connectors, and follow ESD precautions during installation and removal.