Cuenta Contacto
Tu carrito
Envío con DPD y FedEx
¿Dudas? Pregunte a la IA

Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s

Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
51,34 €
The BlueOptics TN-SFP-10G-SR-BO is an SFP+ fiber optic transceiver module designed for optical networks requiring 10G data rates. It supports a maximum data transfer rate of 10000 Mbit/s, uses an SFP+ interface and is housed in a durable silver metal casing that weighs approximately 20 g. The module... Leer más
Stock 860 Código 1485762 Marca BLUEOPTICS Modelo TN-SFP-10G-SR-BO Garantía 2 años

Envíos y devoluciones

Entrega estimada Viernes, Octubre 23
Te mantendremos informado a través de nuestro sistema de seguimiento detallado
Opciones de pago
Tarjeta bancariaVisaMastercardPayPalApple PayGoogle PayTransferencia bancaria

The BlueOptics TN-SFP-10G-SR-BO is an SFP+ fiber optic transceiver module designed for optical networks requiring 10G data rates. It supports a maximum data transfer rate of 10000 Mbit/s, uses an SFP+ interface and is housed in a durable silver metal casing that weighs approximately 20 g. The module implements short-range multi-mode fiber transmission with an LC duplex optical connector and is built to conform with MSA mechanical and electrical standards, providing plug-and-play compatibility with equipment that supports 10GBASE-SR SFP+ modules.

Advantages

The transceiver offers compatibility with standard SFP+ ports and a compact metal form factor that simplifies installation and thermal performance. With a specified MTBF of 1,000,000 hours and a lightweight design, the module is intended to deliver long operational life and minimal maintenance requirements. Its silver metal housing and standard LC duplex connector make it suitable for integration into a wide range of switches, routers and storage interfaces that accept SFP+ optics.

Suitable for

Key specifications

How to use

Power down or follow hot-swap procedures recommended by your equipment vendor before inserting or removing the SFP+ transceiver. Align the LC duplex connector and gently insert the module into the SFP+ slot until it latches. Connect multi-mode fiber patch cords with matching LC duplex connectors and verify link status through your switch or router management interface. If the host device supports digital diagnostics, enable monitoring to view parameters such as optical power and temperature where supported.

Recommendations

Use short-wave 850 nm multi-mode fiber and high-quality LC duplex patch cords for optimal short-range performance. Ensure the host equipment explicitly supports 10GBASE-SR SFP+ modules and, if available, enable digital diagnostics monitoring for proactive link management. Follow manufacturer guidelines for hot-swap handling and ESD precautions during installation.

Aspectos destacados
  • Short-range 10G Ethernet links over multi-mode fiber
  • Interconnects between switches and routers in data center racks
  • High-speed uplinks for storage systems and aggregation points
  • Interface type: SFP+
  • Maximum data transfer rate: 10000 Mbit/s (10G)
  • Optical connector: LC duplex
  • Transmission medium: Multi-mode fiber (short-range)
  • Housing material and colour: metal, silver
  • Weight: 0.02 kg
  • Mean time between failures (MTBF): 1,000,000 hours
Especificaciones
Color del producto
Silver
Compatible con fibra multimodo (MMF)
Yes
Conector de fibra óptica
LC
Distancia máxima de transmisión
300 m
Estándar de transceptor SFP
SR
Ethernet LAN
Yes
Longitud de onda de recepción (máx.)
850 nm
Longitud de onda de transmisión (máx.)
850 nm
Material de la carcasa
Metal
Peso
0.02 kg
Peso del embalaje
30 g
Tecnología de cableado Ethernet de fibra
10GBASE
Temperatura de funcionamiento (T-T)
0 - 70
Temperatura máxima de funcionamiento
70 °C
Temperatura mínima de funcionamiento
0 °C
Tiempo medio entre fallos (MTBF)
1000000 h
Tipo de interfaz
SFP+
Tipo de interfaz Ethernet
10 Gigabit Ethernet
Tipo de transceptor SFP
Fiber optic
Velocidad máxima de transferencia de datos
10000 Mbit/s
Historial de precios de los últimos 6 meses
Módulo transceptor SFP+ BlueOptics TN-SFP-10G-SR-BO 10000 Mbit/s
Actual
51,34 €
Mínimo
50,42 €
Máximo
60,09 €
Variación 24 h
+0,80 €   +2%
Semana
+0,90 €   +2%
Mes
-5,81 €   -10%

Productos populares en esta categoría

Hola, soy el asistente de IA de DistriNode. Puedo ayudarte a encontrar productos, comparar opciones, crear presupuestos en PDF o abrir solicitudes de soporte.