Módulo transceptor SFP28 BlueOptics SFP28-25G-ER-RW-BO 25000 Mbit/s

The BlueOptics SFP28-25G-ER-RW-BO is a fiber optic transceiver module engineered for 25 Gbit/s data links. It uses an SFP28 interface and is intended for deployment in high-speed network switches, routers and media converters where 25 Gbit/s optical connectivity is required. The module is supplied individually and has a lightweight design with a 0.04 kg weight, suitable for density-focused installations and standard SFP28 slots.

Advantages

This SFP28 transceiver supports a 25000 Mbit/s maximum data transfer rate and is compatible with common SFP28 ports, offering straightforward hot-pluggable installation and replacement. The compact form factor and low weight help minimize space and loading constraints in rack and chassis environments. Individual packaging preserves the module during storage and transport, supporting reliable deployment and inventory handling.

Suitable for

• High-speed server and switch uplinks
• Data center interconnects over fiber
• Campus and enterprise backbone links
• Upgrading existing SFP28-capable network equipment to 25 Gbit/s

Key specifications

• Interface type: SFP28
• Maximum data transfer rate: 25000 Mbit/s
• Form factor: SFP28 optical transceiver
• Weight: 0.04 kg
• Packaging: individual

How to use

Ensure the host device supports SFP28 modules and 25 Gbit/s operation before installation. With the host powered down or following the device vendors hot-swap instructions, insert the transceiver into an appropriate SFP28 port until it seats firmly. Connect the fiber optic cable to the optical interface, observing correct fiber type and connector polarity. Verify link status and configure the host interface as required by the network equipment. Remove the module by disengaging the latch or release mechanism according to the device manual.

Recommendations

Use industry-standard single-mode or multimode fiber as specified by your network equipment and link budget. Keep dust caps on when the module is unused, handle the optical interface with care, and follow ESD precautions when installing or removing the transceiver to preserve performance and longevity.