NRGkick Pure Blue Type 2 5 m 22 kW 32A cable de carga

The NRGkick Pure Blue Type 2 5m 22kW 32A Charging Cable is a portable intelligent charging solution for electric vehicles with a Type 2 inlet. The unit supports single-, two- and three-phase AC charging up to 22 kW and connects to standard household sockets, CEE outlets or public charging stations using the appropriate Smart Attachments. It includes integrated residual current protection and a patented high-level safety connector system with temperature monitoring on each phase pin, designed to enable safe, fast and transportable charging without permanent installation.

Advantages

NRGkick delivers up to 22 kW charging power for compatible EVs and allows charging at standard outlets or public charging points with optional Type 2 attachment. The device offers autonomous load management and blackout protection, extensive safety features including hot-unplug detection, arc protection and per-pin temperature monitoring, and robust mechanical and environmental resistance (IP67/IP69k, IK10). It is compact and transportable, upgradeable over-the-air and via the app, and provides Bluetooth and WiFi connectivity with optional GSM/GPS/SIM for remote access and geolocated charging reports.

Suitable for

• Charging electric vehicles with a Type 2 inlet at home using household or CEE sockets
• Charging at public AC charging stations with the Type 2 Smart Attachment
• Mobile or temporary charging needs where permanent wallbox installation is not desired
• Users requiring advanced safety features and transportable high-power charging (up to 22 kW)

Key specifications

• Product: NRGkick Pure Blue Type 2 5m
• Maximum AC power: 22 kW
• Maximum current: 32 A
• Cable length: 5 m
• Connector: Type 2 interface (supports 1-/2-/3-phase)
• Safety: Integrated RCD (AC & DC +6 mA), patented high-level safety connector with temperature monitoring
• Protection ratings: IP67, IP69k; IK10 impact resistance; operating temperature -40 to +70 °C
• Connectivity: Bluetooth, WiFi (GSM/GPS/SIM optional)
• Certifications: VDE, ÖVE validated; CE, UKCA, RCM conform

How to use

Connect the appropriate Smart Attachment for your socket type to the Connector Unit, plug the unit into a compatible power outlet or a public charging station using the Type 2 attachment, and connect the Type 2 plug to your vehicle. Use the free NRGkick app (iOS/Android) via Bluetooth or WiFi to monitor charging, set charging plans, adjust current in 0.1 A steps, and access charging reports. For the GSM/GPS/SIM variant, remote access and geolocated reports are available without a local WiFi network. No permanent installation is required; the device can remain connected to the outlet or be taken with you when needed.

Recommendations

Observe country-specific rules for household socket charging (for example, maximum allowed current in Switzerland). Always use the correct Smart Attachment for the socket type, monitor charging via the app when possible, and keep firmware and app updated to benefit from upgrades and safety improvements.