Panel solar Reolink 2 cámara a batería 6W USB Type-C IP65

Connect the Reolink Solar Panel 2 to a compatible Reolink battery powered camera using the included 4 m connection cable to provide continuous power. This solar panel delivers a rated power of 6 W through a USB Type-C output (6 V, 0.96 A) and has an IP65 rating for weather resistance, making it suitable for outdoor installation where it reduces the need for frequent battery changes.

Advantages

The solar panel provides uninterrupted power to Reolink battery cameras when exposed to sunlight, using a USB Type-C connector for reliable connection. With a 4 m cable it offers flexible placement options and an IP65 enclosure protects the unit from dust and rain. The 6 W rated power and 6 V/0.96 A output are matched to battery-powered camera requirements.

Suitable for

• Reolink battery powered cameras compatible with USB Type-C solar input
• Outdoor camera installations requiring continuous trickle charging
• Locations where reducing manual battery replacement is desired

Key specifications

• Rated power: 6 W
• Connector: USB Type-C
• Output voltage: 6 V
• Output current: 0.96 A
• Cable length: 4 m (included)
• Ingress protection: IP65 (weather-resistant)

How to use

Mount the solar panel outdoors in a location with good sun exposure and run the included 4 m connection cable to the compatible Reolink battery camera. Connect the panel’s USB Type-C plug to the camera’s solar input port. Ensure the panel is secured at an angle that maximizes sun exposure and check that the cable routing avoids sharp bends or water ingress at connection points.

Recommendations

For optimal performance, install the panel where it receives direct sunlight for most of the day and periodically clean the surface of dust and debris. Verify camera compatibility with 6 V/0.96 A solar input before installation and use the supplied cable to maintain the IP65 rating at the panel end.