Pattex Kraft-Mix Pegamento epoxi de dos componentes, 2 x 12 g, pegado universal de alta resistencia, transparente, resistente al agua, pintable, lijable, taladrable

When ordinary single-component glues fail on demanding materials, Pattex Kraft-Mix delivers a two-component epoxy system that cures to a tough, gap-filling bond with up to 130 kg/cm² tensile strength. The 2 x 12 g twin syringe ensures precise 1:1 mixing of resin and hardener, giving you a solvent-free adhesive that works on metal, wood, stone, ceramic, glass, concrete, and many plastics. Unlike brittle instant adhesives, this epoxy remains impact- and vibration-resistant, and once fully cured it can be painted, sanded, and even drilled—making it a true structural repair solution for both indoor and outdoor use.

Highlights

• Two-component epoxy adhesive with high bonding strength up to 130 kg/cm² (13 N/mm²)
• Universal material compatibility: metal, wood, stone, ceramic, glass, concrete, and many plastics (except PE, PP, PTFE)
• Initial handling strength in approx. 5 minutes; full cure in approx. 24 hours
• Transparent, light yellowish cured colour for discreet repairs
• Water-resistant and temperature-resistant from -30°C to +100°C
• Gap-filling capability for uneven or cracked surfaces
• Solvent-free, low-odour formula
• Paintable, sandable, and drillable after full cure
• High impact and vibration resistance for durable bonds
• Pack contains 2 syringes of 12 g each (24 g total)

In daily use

Pattex Kraft-Mix is the go-to adhesive for repairs that need to hold under stress. Mix equal parts of resin and hardener directly from the twin syringe, apply to clean, dry surfaces, and clamp or support the part until handling strength is reached. After 24 hours, the bond is fully cured and can be finished as needed.

Full specifications

• Adhesive Type: Two-component epoxy adhesive
• Curing Time (Initial): Approx. 5 minutes (handling strength)
• Curing Time (Full): Approx. 24 hours (maximum strength)
• Bonding Strength: Up to 130 kg/cm² (13 N/mm²)
• Total Content: 24 g (2 x 12 g)
• Material Compatibility: Metal, wood, stone, ceramic, glass, concrete, many plastics (excluding PE, PP, PTFE)
• Temperature Resistance: -30°C to +100°C
• Water Resistance: Yes
• Gap Filling Capability: Yes
• Color (Cured): Transparent / Light yellowish
• Application: Universal, high-strength bonding, repairs, filling
• Chemical Basis: Epoxy resin and hardener
• Application Method: Manual mixing of equal parts
• Solvent-Free: Yes
• Paintable: Yes (after full cure)
• Sandable: Yes (after full cure)
• Drillable: Yes (after full cure)
• Impact Resistance: High
• Vibration Resistance: High
• Shelf Life: 24 months (unopened)

Final note

For structural repairs that demand strength, durability, and versatility, Pattex Kraft-Mix is the professional choice.