Placa de cubierta Jung A 590 BF ANM antracita para programas de interruptores compatibles, protección IP44

Jung A 590 BF ANM anthracite cover plate is a finished front plate designed to fit Jung-compatible switch and socket ranges such as the 501 U, 502 U, 503 U, 506 U and 507 U families and their variants. Finished in a muted anthracite tone, the plate provides a neat appearance while offering protection for the installed electrical modules. The product delivers IP44 protection, shielding the aperture from splashes and solid particles and making it suitable for indoor locations where occasional moisture or dust exposure may occur.

Advantages

The cover plate combines a standardized cutout and mounting geometry compatible with multiple Jung ranges, ensuring straightforward replacement or upgrade of existing frames. Its IP44 rating offers verified splash and dust protection at the device front, while the anthracite finish provides a neutral aesthetic that integrates with many interior schemes. The plate is a finished, single-piece front intended to conceal wiring and module edges for a consistently neat installation.

Suitable for

Key specifications

How to use

Turn off power to the circuit before removing or installing the cover plate. Remove the existing frame or cover and position the Jung A 590 BF ANM plate over the installed modules, aligning the cutouts with the switch and socket modules. Secure the plate using the original mounting screws or clips provided by the module/frame system, taking care not to overtighten to avoid deformation. After installation, restore power and test the switches and sockets for correct operation.

Recommendations

Use this cover plate in environments where IP44 protection is adequate; it is not rated for direct water jets or full outdoor exposure. For wet or exterior applications requiring higher ingress protection, select a product with an appropriate higher IP rating. Clean the plate with a soft damp cloth and mild detergent; avoid abrasive cleaners or solvents that could damage the finish.