Placa de montaje en pared ShiverPeaks 89799 para unos 18 mm de distancia a la pared, máxima conectividad

The ShiverPeaks wall mount plate 89799 positions equipment approximately 18 mm from the wall while enabling access to interfaces and cabling. Designed as a fixed mounting bracket, it supports compact electronics, AV modules and network devices that require a stable close-to-wall installation with minimal clearance. The plate provides a slim profile that keeps devices accessible for connectivity without creating excessive distance from the mounting surface.

Advantages

This wall mount plate offers a compact installation profile that maintains device accessibility for cables and ports. Its fixed design ensures stable attachment and straightforward alignment during installation. The configuration emphasizes maximum connectivity by allowing room for connectors and cable routing behind or alongside mounted equipment. Materials and dimensions are chosen to balance a slim wall gap with the mechanical support needed for small to medium-weight devices.

Suitable for

• AV modules and media players that require near-wall mounting
• Network devices such as compact switches, routers or access points
• Small form-factor electronics and interface boxes with rear or side connectors
• Installations where a minimal gap to the wall (approx. 18 mm) is required for aesthetics or space constraints

Key specifications

• Approximate wall distance: 18 mm for close-proximity mounting
• Mount type: fixed wall plate suitable for secure attachment
• Compatibility: intended for compact devices with rear or side connectors
• Design focus: slim profile to preserve access to ports and cables
• Typical use environment: indoor installations for AV and network equipment

How to use

Mark the mounting position on the wall at the desired height, taking into account the device's connector locations and required cable routing. Secure the plate to the wall using appropriate fasteners for the wall material and the device weight. Attach the equipment to the plate, ensuring connectors are aligned and cables can be accessed or routed without strain. Verify that the mount holds the device securely and that all interfaces remain reachable for connection and maintenance.

Recommendations

Use wall anchors or screws appropriate for the wall substrate and the mounted device weight. Allow sufficient clearance for larger connectors or angled plugs, and route cables to avoid sharp bends. For devices with active cooling or ventilation, ensure that mounting close to the wall does not obstruct airflow.