PNI AP800D gate automation kit, 230 V, 1100 N, 800 kg sliding gate, 4 m rack

The PNI AP800D gate automation kit includes a motor, warning light, two photocells, two remote controls, mounting accessories and a 4 m metal rack for automating a self-supporting sliding gate. The motor has a power of 350 W and can open or close gates with a maximum weight of 800 kg.

Key features

• Motor for automatic sliding gates with 350 W power and 800 kg maximum gate weight
• Local and remote control: 2 remote controls included, can connect access buttons, keypads, card readers, smart relays with internet control
• Obstacle detection: adjustable sensitivity from low to high, motor stops if obstacle encountered
• Photocells detect obstacles in gate opening and automatically stop the motor
• Automatic shutdown: programmable auto-close after 10, 30 or 60 seconds
• Condominium mode for simultaneous control from multiple access devices
• Weatherproof motor with integrated control panel
• Pinion module I-4
• Includes 4 m metal rack (4 × 1 m sections)
• Warning light with 12-265 V power supply, 1.5 W, size 90 × 80 × 140 mm
• Photocells with 12/24 V power supply, up to 10 m communication distance, size 75 × 30 × 50 mm
• Remote controls with alkaline 23 A 8 V battery, up to 50 m communication distance, 433 MHz frequency
• Wheel features: wheel diameter 680 mm, distance between wheels 740 mm
• Rack features: length 1 m, material steel, rail size 1050 × 30 × 8 mm
• Do not weld when the unit is mounted on the bearing sets (the bearing contact is damaged) or when the engine is mounted (it leads to failure of the board and its wiring)

Specifications

• Package contents: User manual, Motor, Lamp, Photocells (2 pcs.), Remote control (2 pcs.), Pier (2 pieces), Mounting accessories
• Engine feeding: 230 V
• Engine power: 350 W
• Opening/closing speed: 12 m/min
• Limit noise: ≤55 dBa
• Weatherproof: Yes
• Integrated control panel: Yes
• Pinion module: I-4
• Remote control battery: Alkaline, 23 A, 8 V
• Remote control communication distance: Up to 50 m
• Remote control frequency: 433 MHz
• Lamp feeding: 12-265 V
• Lamp power: 1.5 W
• Lamp size: 90 × 80 × 140 mm
• Photocell feeding: 12 / 24 V
• Photocell communication distance: Up to 10 m
• Photocell size: 75 × 30 × 50 mm
• Wheel diameter: 680 mm
• Distance between wheels: 740 mm
• Rack length: 1 m
• Rack material: Steel
• Rail size: 1050 × 30 × 8 mm
• Measurement weight: gross 17.8 kg, net 16.78 kg
• Measurement dimensions: product 25 × 18.5 × 28 cm, package 32 × 32.5 × 120 cm