PNI Echo One Microphone Kit for PNI HP 6500 and PNI HP 7120 with echo module and sticky Pad Flag included

• Microphone type: With echo
• Product code: PNI-ECH-01
• Product color: Black
• General characteristics

Number of pins

• Connector Type: RJ11
• Channel change buttons: Yes
• Compatible stations: PNI Escort HP 6500, PNI Escort HP 7120, PNI Escort HP 6550
• Built-in speaker
• Dimensions: 50 x 75 x 30 mm
• Operating temperature: -26°C ~ +80°C
• Cable length: 80-100 cm
• The package contains
• CB Radio Station Microphone: Yes
• Echo mode and roger beep: Yes, pre-installed
• PNI-SPAD-04 - Sticky Pad Flag Accessory for Mobile Devices
• Product code: PNI-SPAD-04
• Manufacturer: PNI
• Main features
• Dimensions: 45 x 45 x 3 mm
• Material: Plastic
• Color: Red, Yellow and Blue
• Brand Compatible: Universal
• PNI-ECH-01 - PNI Echo One microphone for PNI HP 6500 and PNI HP 7120 with adjustable echo mode and programmable roger beep compatible with any radio station model.
• Pre-installed echo and roger beep module

The pre-installed echo and roger beep module in the microphone has the following main functions:

• Echo: Generation of the echo effect of the signal captured by the radio station's microphone and its insertion into the modulation stage;
• Roger beep: Generating a custom signal (via MP3 audio file) at the end of the broadcast and maintaining it.
• Custom Roger Beep Effect

Plug a USB cable into the micro USB jack on the microphone's internal board and into a computer and copy the custom audio file (MP3 or WAV, maximum duration 1.5 seconds) according to the instructions in the manual.

As a result, at the end of each broadcast, you will also transmit the personalized audio signal that will be received by the other CB users as an end-of-broadcast warning.

• Compatibility

The PNI Echo One microphone is compatible with PNI Escort HP 6500, PNI Escort HP 7120, PNI Escort HP 6550 CB radio stations and any CB station with an RJ11 connector with an output voltage of 5V on PIN 4.

Add these two new functions to your station and you'll make a difference: your received voice will be distinguished from the others by the echo effect, and the end of your broadcast will be marked by an original audio signal.

• Echo Settings

Echo adjustments can be made through the 2 potentiometers on the microphone board, with the help of a ceramic screwdriver.

• Setting 1: Here you can adjust the echo length. Modify and test continuously until you get the desired result.
• Setting 2: Here you can adjust the number of echo repetitions per second. Modify and test repeatedly until you get the desired result.
• Connect to your computer and copy custom sound

To write another sound (maximum 1.5 second beeps) in MP3 or WAV format, you need to connect the microphone via a micro USB-to-USB cable to your laptop (computer) and activate the power switch ("Open" position).

In a few seconds, the laptop will find the memory xx MB, then by copying transfer the file to the memory of the module.

Remember to switch the module switch back to its original working position.

• Sticky Pad Special Adhesive

The anti-slip holder is a quick and simple method to have your mobile phone at hand when you are in the car. It is made of a special and very durable material with double anti-slip characteristics. The holder can also keep other objects such as sunglasses, lighters, keys, headphones or bluetooth devices safe.

• Extremely sticky, good for any phone or case

The anti-slip support can be reused countless times, after it loses its anti-slip qualities the support is washed, dried and will regain its original properties

• Gross weight: 0.16 kg
• Net weight: 0.11 kg
• Product dimensions: 5 × 7.5 × 3 cm
• Package dimensions: 9.5 × 11 × 6 cm
• Box dimensions: 50.5 × 24 × 33 cm
• Units per box: 50
• Box weight: 9.25 kg