Polymaker filamento ASA – 1,75 mm, 1 kg, natural – resistente a UV, intemperie y calor PF01006

ASA filament with a Vicat softening temperature of 100 °C, engineered for parts that must endure sun, rain and heat without warping like ABS.

Overview

Polymaker PF01006 is a 1.75 mm ASA (Acrylonitrile Styrene Acrylate) filament in Natural colour, supplied on a 1 kg cardboard spool. It prints at 240–260 °C with a heated bed at 90–105 °C, producing components with high UV and weather resistance for long-term outdoor use.

What stands out

• UV and weather resistant – ideal for outdoor applications
• High heat resistance – Vicat softening temperature of 100 °C
• Low odour compared to ABS
• Moderate shrinkage – less warping than ABS
• Cardboard spool for easy recycling

Technical details

• Material: ASA
• Diameter: 1.75 mm
• Net weight: 1 kg
• Colour: Natural
• Print temperature: 240–260 °C
• Bed temperature: 90–105 °C
• Recommended print speed: 30–50 mm/s
• Cooling fan: Off
• Enclosure: Recommended
• Density: 1.07 g/cm³
• Tensile strength: 40 MPa
• Elongation at break: 3%

Our verdict

A dependable ASA filament for functional outdoor parts, with consistent diameter and a natural finish that takes paint well.