POLYMAKER PETG 1,75mm amarillo 1kg filamento 3D (PB05007)

POLYMAKER PolyLite PETG filament offers an excellent balance of ease of use and mechanical properties, making it a popular choice for functional prototypes and end-use parts. This 1.75mm diameter filament in vibrant yellow comes on a 1kg spool, vacuum-sealed with desiccant for optimal storage.

Advantages

PolyLite PETG is known for its low warp, good layer adhesion, and chemical resistance. It prints easily on a wide range of FDM 3D printers and produces durable, impact-resistant parts with a glossy finish.

Suitable for

• Functional prototypes and mechanical parts
• Outdoor applications due to UV and weather resistance
• Containers and enclosures requiring chemical resistance
• Artistic and educational projects

Key specifications

• Material: PETG (Polyethylene Terephthalate Glycol)
• Diameter: 1.75 mm (±0.03 mm tolerance)
• Net weight: 1 kg
• Colour: Yellow
• Recommended nozzle temperature: 230-240 °C
• Recommended bed temperature: 70-80 °C
• Printing speed: 40-60 mm/s
• Density: 1.23 g/cm³
• Tensile strength: 35.8 ± 1.8 MPa
• Elongation at break: 20.6 ± 2.0%
• Flexural modulus: 1573 ± 100 MPa
• Impact strength (Izod notched): 7.8 ± 0.4 kJ/m²
• Heat deflection temperature (HDT @ 0.45 MPa): 65 °C
• Glass transition temperature (Tg): 80 °C
• Spool material: Recycled cardboard

Recommendations

For best results, store filament in a dry environment and dry before use if moisture absorption is suspected. Use a hardened steel nozzle if printing abrasive materials. Ensure proper bed adhesion with a heated bed and suitable adhesive if needed.