PowerWalker VI 600 MS FR SAI Line-Interactive 0,6 kVA 360 W 8 salidas AC

PowerWalker VI 600 MS FR is a compact line-interactive UPS providing 0.6 kVA (360 W) of backup power. The unit includes eight AC outlets, with four sockets on battery backup for critical equipment and four sockets on bypass for non-critical loads. Integrated AVR (Automatic Voltage Regulation) maintains stable output during voltage fluctuations, and a USB Type-B communication port allows monitoring and control via software or HID mode. A 2.1 A USB charging port and a rear-accessible battery compartment simplify everyday use and maintenance.

Advantages

The multi-socket layout separates critical and non-critical loads, optimising battery use. AVR stabilises input voltage to protect connected electronics from surges and sags. USB connectivity supports software monitoring and HID operation without additional drivers. The front-facing design and rear battery access enable flexible placement and straightforward battery replacement.

Suitable for

• Home office setups and workstations
• Network-attached storage (NAS) and small servers
• Routers, modems and network equipment
• Small office electronics and point-of-sale terminals

Key specifications

• Output power: 360 W
• Apparent power capacity: 0.6 kVA
• AC outlets: 8 (4 with battery backup, 4 bypass)
• Battery: 12 V, 7 Ah
• USB ports: Type-B communication port and 2.1 A charging port
• Form factor: freestanding or wall-mountable
• Weight: 4.4 kg
• Colour: Black

How to use

Place the UPS on a stable surface or mount it on a wall following the included mounting instructions. Connect critical devices to the battery-backed outlets and non-critical devices to the bypass outlets. Plug the UPS into mains power to charge the internal battery before use. For communication and monitoring, connect a computer with a USB Type-B cable and install compatible PowerWalker software if detailed monitoring is required; HID mode allows basic status reporting without drivers. Use the 2.1 A USB charging port to charge mobile devices.

Recommendations

The UPS should be installed in a well-ventilated, dry location away from direct heat sources. Regularly check the battery health and replace the battery via the rear compartment when capacity decreases. Do not overload the battery-backed outlets and distribute non-critical loads to the bypass outlets to extend backup time for essential equipment.