Proyector INFOCUS IN0044SL — DLP XGA (1024x768), 4600 lúmenes ANSI, lámpara, 3D, zoom/enfoque manual, blanco

INFOCUS IN0044SL is a DLP projector with native XGA (1024x768) resolution and a rated brightness of 4600 ANSI lumens. Designed for standard-throw installation, it uses a lamp light source with an indicated service life of up to 15,000 hours (10,000 hours in economic mode). The projector accepts WUXGA (up to 1920×1200) input signals, supports 3D content, and provides manual zoom and focus (focal length 21.85–24.01 mm). Physical design is compact and lightweight, finished in white and weighing approximately 2.9 kg. Control and service interfaces include RJ-45, RS-232 and a USB Type-A service port.

Advantages

The IN0044SL combines a relatively high brightness level for well-lit spaces with the simplicity of lamp-based illumination and manual optical controls. Its XGA native resolution delivers readable text and structured visuals in classrooms and meeting rooms, while WUXGA input compatibility allows display of higher-resolution sources. The combination of RJ-45 and RS-232 control options and a USB Type-A service port supports standard AV installation and maintenance workflows.

Suitable for

• Classroom presentations and lectures
• Corporate meeting rooms and training spaces
• Small auditoria and conference areas with ambient light
• Fixed installations where manual lens adjustment is acceptable

Key specifications

• Projection technology: DLP
• Native resolution: XGA (1024 × 768), aspect ratio 4:3
• Brightness: 4600 ANSI lumens
• Light source: Lamp, service life up to 15,000 hours (10,000 hours in economic mode)
• Accepted input: supports up to WUXGA (1920 × 1200) signal input
• Optics: manual focus and manual zoom (focal length 21.85–24.01 mm)
• 3D support: compatible with 3D content
• Weight and colour: approx. 2.9 kg, white enclosure
• Control and service ports: RJ-45, RS-232, USB Type-A service port

How to use

Install the projector on a stable surface or mount it according to the installation environment and align it with the projection surface. Connect the video source using the appropriate cable and set source resolution; the projector will accept inputs up to WUXGA while displaying natively at XGA. Use the manual zoom and focus controls to adjust image size and sharpness, then fine-tune keystone or projector placement to center the image. Select lamp mode depending on ambient light and runtime preferences to balance brightness and lamp life.

Recommendations

For reliable operation, use the projector in a well-ventilated environment, avoid prolonged operation in dusty conditions, and follow the lamp replacement schedule to maintain image quality. Choose standard lamp mode for brighter rooms and economic mode when longer runtimes and lower brightness are acceptable. Use the RJ-45 or RS-232 control interfaces when integrating the projector into managed AV systems.