Batería LiFePO4 Pylontech 2x US3000D 7 kWh con set de cables de conexión para inversor

The Pylontech US3000D lithium iron phosphate battery is a high-quality energy storage system for integration into PV systems with an increased depth of discharge of 95%.

• >8000 cycles at 95% DoD

The Pylontech US3000D is a modular low-voltage LiFePO4 storage system for stationary energy storage systems. The battery module offers a nominal capacity of 3.55 kWh at a nominal voltage of 48 V and is suitable for building flexibly scalable storage solutions. For monitoring and control, the US3000D has an integrated battery management system (BMS) as well as CAN and RS485 interfaces. Thanks to its compact design, the battery is also designed for integration into 19-inch rack systems.

• Scalable 48 V battery storage with integrated BMS
• 3.55 kWh nominal capacity and 3.3 kWh usable capacity per module
• 48 V nominal voltage for low-voltage storage systems
• Lithium iron phosphate technology (LiFePO4)
• 95% depth of discharge (DoD)
• Soft start to limit inrush current
• Expandable up to 16 battery modules per battery group

Integrated battery management system (BMS) for monitoring and protecting the storage system

CAN and RS485 interfaces for communication with compatible system components

• More than 8,000 cycles at 25 °C
• Natural cooling without active fans
• Status and state of charge display via LEDs
• Modular design for different storage capacities

Individual modules can be connected in parallel, allowing the storage capacity to be adapted to the respective energy demand. For larger systems, multi-group operation is also possible. Parallel connection is particularly relevant when an existing storage system is to be expanded later. A new battery module can be added to an existing system without any problems. Before expansion, however, the states of charge of the batteries must be equalized. Important note: The previous version US3000C can also be combined. The newest battery must always be set as master.

• Integrated BMS for monitoring and protection

A battery management system is integrated in the battery. The BMS monitors important operating states and takes over protective functions for charge and discharge voltage, charge and discharge overcurrent, high or low cell temperatures, and short circuit. In addition, the calculation of available capacity, monitoring of the circuit, and communication with the inverter are among the described functions. The LEDs on the front allow operating status, alarm states, and the current state of charge (SOC) to be read directly on the battery module.

Included in the set is a battery connection cable set (Pylontech to inverter). The Pylontech battery connection cable set includes 2 x 2 meter cables (plus/minus) each with a cross-section of 25mm² and a CAN data cable with RJ45 connectors on both ends. The set is needed to connect the Pylontech batteries to an inverter.

• 1x battery connection cable set Pylontech to inverter