Qoltec Inversor de onda senoidal modificada 12V a 230V 2500W/5000W con USB, compatible con LiFePO4 GEL AGM

When you need to run 230V appliances from a 12V battery, a pure sine wave inverter is often overkill and expensive. The Qoltec MS Wave inverter delivers modified sine wave power at 2500W continuous and 5000W peak, making it a practical choice for tools, lights, and electronics that don't require a perfect waveform.

Who is it for

This inverter suits users with 12V battery banks—LiFePO4, GEL, or AGM—who need reliable AC power on the go: campers, caravan owners, off-grid cabins, mobile workshops, and emergency backup setups.

Main features

• Modified sine wave output: 230V AC, 50Hz, suitable for most resistive and many inductive loads.
• High power capacity: 2500W continuous, 5000W peak for motor startups and surges.
• Dual Schuko AC outlets to power two devices simultaneously.
• Built-in USB port (5V/2A) for charging phones, tablets, and other small devices.
• Wide DC input range: 10.5V–15.5V, compatible with 12V LiFePO4, GEL, and AGM batteries.
• Active cooling fan keeps the unit within safe operating temperatures.
• Comprehensive protection: overload, short circuit, overheating, overvoltage, undervoltage, and reverse polarity.
• Low battery alarm and shutdown prevent deep discharge of your battery.
• High efficiency: >90% conversion to minimize battery drain.

Specifications

• Inverter type: Modified sine wave
• Input voltage: 12V DC (range 10.5V–15.5V)
• Output voltage: 230V AC
• Continuous power: 2500W
• Peak power: 5000W
• Output frequency: 50Hz
• USB output: 5V / 2A
• Efficiency: >90%
• AC outlets: 2x Schuko
• Battery compatibility: LiFePO4, GEL, AGM
• Cooling: Active fan
• Protection: Overload, short circuit, overheating, overvoltage, undervoltage, reverse polarity
• Low battery alarm: Yes
• Low battery shutdown: Yes
• Operating temperature: -10°C to +50°C

Tips

Modified sine wave inverters may cause a slight buzz in some audio equipment and are not recommended for sensitive medical devices. Always size your battery bank to handle the continuous load, and ensure proper ventilation around the inverter.