Radiador para ordenador Darkflash DN-D360 WHITE 360mm — radiador de refrigeración de 360mm para refrigeración líquida de PC

Darkflash DN-D360 WHITE is a 360mm all-in-one liquid CPU cooler that combines a copper water block, aluminum radiator and three 120mm PWM fans with ARGB lighting. The cooler includes a 2.1-inch 480×480 LCD on the pump to display CPU and RAM temperatures and pump speed, IIR+EPDM tubes for improved heat and pressure resistance, and broad socket compatibility for Intel (115x, 1200, 1700) and AMD (AM3, AM4, AM5) platforms.

Advantages

The copper water block and aluminum heatsink provide efficient thermal conductivity and heat dissipation. Three 120mm PWM fans with hydraulic bearings deliver adjustable airflow from 800 to 1,800 RPM with a rated MTBF of 40,000 hours, while ARGB lighting and an LCD enable visual customization and real-time monitoring. The pump’s three-stage motor achieves a coolant flow of 1.6 l/min for effective cooling with low noise. IIR+EPDM tubing increases flexibility and durability under high temperature and pressure.

Suitable for

• Cooling high-performance desktop CPUs in gaming or workstation builds
• Systems that require a 360mm radiator with triple 120mm fan configuration
• Users who want on-pump monitoring via an LCD and ARGB lighting synchronization

Key specifications

• Manufacturer: Darkflash
• Model: DN-D360 WHITE
• Cooling type: Liquid (AIO)
• Radiator size: 397 x 120 x 27 mm (360mm class)
• Heat sink material: Aluminum
• Water block material: Copper
• Fans: 3 × 120 × 25 mm, PWM, 800–1,800 RPM ±10%, hydraulic bearing, 61.7 CFM max
• Fan backlight: ARGB (3-pin)
• Pump: 3-stage motor, flow rate 1.6 l/min, pump connector 4-pin PWM
• Tubing: IIR+EPDM
• Compatibility: Intel 115x / 1200 / 1700; AMD AM3 / AM4 / AM5
• LCD: 2.1" 480×480 px, 16.7M colors
• Supply voltage: 12V
• MTBF: 40,000 hours

How to use

Mount the radiator and three 120mm fans in a compatible 360mm location inside the case, secure the heatsink and attach the water block to the CPU using the supplied Intel or AMD mounting brackets and spacers. Connect the pump to a 4-pin PWM header for pump speed control and plug fans into PWM headers or a hub for synchronized control. Attach the 3-pin ARGB connector to a compatible header or controller for lighting. Use the included DP5 thermal paste when mounting the water block and verify installation by monitoring temperatures on the pump LCD or via the Darkflash control software.

Recommendations

Ensure sufficient case airflow and compatible mounting space for a 360mm radiator. Use the provided mounting hardware for the correct socket and apply the supplied DP5 thermal paste evenly. Monitor CPU and pump temperatures after first startup and adjust fan/pump curves in software or BIOS as needed.