Remache ciego GESIPA VA A2 5x16 mm para 9,5–11 mm cabeza redonda plana

Blind rivet GESIPA VA A2 5x16 mm for 9.5–11 mm Flachrundkopf is a stainless-steel blind rivet designed for permanent fastening where rear-side access is restricted. Manufactured in A2 (VA) stainless steel, this 5 x 16 mm rivet is intended for use with Flachrundkopf (flat countersunk-style) heads and is compatible with holes in the 9.5–11 mm range. It is suitable for joining thin sheet materials, panels and structural assemblies where corrosion resistance and long-term clamping are required.

Advantages

The A2 stainless-steel construction provides corrosion resistance for indoor and many outdoor applications, reducing the risk of rust and degradation. The blind rivet format allows installation from one side, making it practical for assemblies with inaccessible backsides. Its 5 x 16 mm dimensions and Flachrundkopf head form a reliable clamp on sheet materials and panel joints, delivering consistent grip and dimensional stability over time.

Suitable for

• Joining sheet metal and panels
• Structural joints with limited rear access
• Corrosion-resistant assemblies in indoor and sheltered outdoor environments
• Applications requiring a Flachrundkopf (flat-style) head and a 9.5–11 mm hole

Key specifications

• Material: A2 (VA) stainless steel
• Rivet size: 5 x 16 mm (diameter x length)
• Head type: Flachrundkopf (flat head style)
• Compatible hole diameter: 9.5–11 mm
• Installation type: blind (one-sided) riveting

How to use

Prepare the workpieces by drilling a hole within the specified 9.5–11 mm diameter range. Insert the blind rivet through the aligned parts so the Flachrundkopf head sits flush against the accessible surface. Using a suitable blind-rivet tool sized for 5 mm rivets, pull the mandrel until the rivet body deforms and sets, forming a secure clamp on the blind side. Remove the broken mandrel as per the tool instructions and inspect the joint for correct setting and alignment.

Recommendations

Use rivets in materials with compatible thickness to ensure sufficient grip length and avoid overtightening. For outdoor or marine exposure beyond sheltered conditions, verify material compatibility and consider alternative grades if higher corrosion resistance is required. Store rivets in a dry environment to maintain material condition prior to use.