Robot aspirador Ecovacs Deebot X11 Pro Omni — negro, Li‑Ion 6400 mAh, 206 min de autonomía, 0,22 L de depósito de polvo, estación base 2,5 L

Black vacuum and mop robot paired with an All‑in‑One OMNI station combines powerful suction and wet mopping in one device. The integrated OMNI station supports PowerBoost charging, hot water soak washing, dual cleaning solutions and automated maintenance cycles. The robot uses OZMO Roller 2.0 with Blast Technology for improved debris pickup, TruEdge 3.0 for enhanced edge cleaning, AIVI 3D 3.0 with OMNI‑Approach for advanced navigation and TruePass Adaptive 4WD to handle thresholds and carpets. It is intended for households that need both vacuuming and wet cleaning with long runtime and automatic return to the base station.

Advantages

The All‑in‑One OMNI station provides fast PowerBoost charging and a hot water soak washing function that reduces manual mop maintenance. OZMO Roller 2.0 with Blast Technology improves debris collection on hard floors and carpets while TruEdge 3.0 enhances edge and corner cleaning. TruePass Adaptive 4WD helps the robot cross thresholds and climb small obstacles. The unit is bagless, operates quietly at about 62.9 dB, delivers strong suction up to 19,500 Pa and offers a long Lithium‑Ion battery runtime of approximately 206 minutes.

Key specifications

• Model: Vacuum & mop robot (black) with All‑in‑One OMNI station
• Suction power: 19,500 Pa
• Noise level: 62.9 dB
• Battery type: Lithium‑Ion (Li‑Ion) 6,400 mAh
• Runtime: up to 206 minutes
• Charging time: about 3 hours (PowerBoost charging)
• Mop system: OZMO Roller 2.0 with Blast Technology
• Edge cleaning: TruEdge 3.0 Extreme Edge Cleaning
• Climbing system: TruePass Adaptive 4WD Climbing System
• Navigation: AIVI 3D 3.0 with OMNI‑Approach Technology
• Station features: Hot Water Soak Washing, Dual Cleaning Solutions, automatic base return
• Dustbin: bagless, 0.22 L
• Cleaning modes: wet mopping and vacuuming

How to use

Place the robot on the All‑in‑One OMNI station and charge using PowerBoost charging until the battery is full (about 3 hours). Fill the station reservoirs with the recommended cleaning solutions when using the hot water soak or dual solution functions. Position the robot on the floor, choose vacuum, wet mop or combined mode via the control app or device buttons, and start the cleaning cycle. The robot navigates with AIVI 3D 3.0 and uses TruePass Adaptive 4WD to handle small thresholds and carpets. After a cycle it returns automatically to the OMNI station for washing, charging and automated maintenance.

Recommendations

Use manufacturer‑recommended cleaning solutions in the OMNI station, check and clean the OZMO Roller 2.0 and filters periodically, empty the 0.22 L dustbin regularly and keep station reservoirs clean; run the hot water soak washing cycle occasionally to maintain mop hygiene.