RUKO HGB-DIN352-HSS-60°-M24x3.00 mm macho de roscar manual

Cutting internal M24 coarse threads by hand in steel, cast iron, or non-ferrous metals requires a tap that stays sharp, follows the hole accurately, and clears chips without jamming. The RUKO HGB-DIN352-HSS-60°-M24x3.00mm hand tap is made for exactly that job.

Who is it for

Machinists, maintenance technicians, and metalworkers who need a reliable hand tap for occasional threading or repair work in through and blind holes.

Main features

• Metric coarse thread M24 with 3.00 mm pitch to DIN 352
• High-speed steel (HSS) body for durability and heat resistance
• 60° thread angle with right-hand cutting direction
• Straight flutes for effective chip evacuation in general-purpose work
• ISO 2 (6H) tolerance class for standard fit threads

Specifications

• Product type: Hand tap
• Thread size: M24
• Pitch: 3.00 mm
• Standard: DIN 352
• Material: HSS
• Thread angle: 60°
• Cutting direction: Right-hand
• Tolerance class: ISO 2 (6H)
• Overall length: 140 mm
• Thread length: 45 mm
• Shank diameter: 18 mm
• Square drive: 14.5 mm
• Number of flutes: 4
• Flute type: Straight
• Surface treatment: Uncoated

Tips

Use a suitable cutting oil and back off the tap every half turn to break the chip. For blind holes, clear chips from the flutes before the final pass.