RUKO HGB-DIN352-HSS-60°-M2x0,40mm Macho de roscar manual

Machinists and metalworkers use this RUKO hand tap to cut clean M2 metric threads in steel, cast iron, and non-ferrous metals. It follows DIN 352 geometry with a 60° flank angle and ISO2 (6H) tolerance, so the threads fit standard M2 fasteners. The HSS body is bright-finished and has three flutes for efficient chip removal in both through and blind holes.

Key specifications

• Thread size: M2
• Thread pitch: 0.40 mm
• Standard: DIN 352
• Material: High-Speed Steel (HSS)
• Flank angle: 60°
• Tolerance class: ISO2 (6H)
• Cutting direction: Right-hand
• Number of flutes: 3
• Total length: 44 mm
• Thread length: 11 mm
• Shank diameter: 2.5 mm
• Square drive size: 2.1 mm
• Recommended core hole diameter: 1.6 mm
• Surface treatment: Bright (uncoated)

Why choose it

Ideal use cases

• Creating M2 internal threads in metal parts
• Repairing damaged threads in machinery
• Prototyping and small-batch production
• Maintenance and repair workshops

Good to know

Use a suitable tap wrench with a square drive of 2.1 mm. Pre-drill with a 1.6 mm core hole for best results. Apply cutting fluid suitable for the workpiece material.