SATA de 15 pines a 2 conectores hembra Molex de 4 pines 20 cm DeLOCK 65159

This DeLOCK cable converts a SATA 15-pin power connector to two 4-pin Molex female connectors, enabling power from a PC power supply with a SATA output to be used by devices that require Molex 4-pin power. The cable is 20 cm long and has a SATA male plug on one end and two Molex female sockets on the other. The multicolour design distinguishes the cable visually while remaining compatible with standard internal PC power connections.

Advantages

The adapter supports powering up to two devices with 4-pin Molex connectors from a single SATA power output and keeps installation simple thanks to its plug-and-play design. Its 20 cm length offers convenient routing inside typical PC cases, and the Molex female sockets match standard 4-pin Molex power plugs used by many drives and accessories.

Suitable for

• Connecting legacy drives or peripherals with 4-pin Molex power connectors to a PSU SATA power line
• Powering two Molex-powered devices from one SATA power connector
• Internal PC builds and upgrades where Molex power is required

Key specifications

• Manufacturer: DELOCK
• Model: 65159
• EAN: 4043619651597
• Connector A: SATA 15-pin (male)
• Connector B: 2 × 4-pin Molex (female)
• Length: 20 cm
• Colour: Multicolour

How to use

Plug the SATA 15-pin male connector into an available SATA power socket from the PC power supply. Connect up to two devices requiring 4-pin Molex power by inserting their Molex male plugs into the two Molex female sockets on the cable. Ensure connectors are fully seated and route the cable to avoid sharp edges or moving parts.

Recommendations

Use this adapter only for low-voltage internal PC power connections and avoid overloading the SATA power source by confirming the combined current draw of connected Molex devices does not exceed the PSU’s SATA rail specifications.