Sensor de movimiento Steinel SensIQ S 20m IP54, detector de presencia con alcance de 20 m, protección intemperie IP54

Steinel SensIQ S is a motion and presence detector designed to monitor activity up to 20 metres. With IP54 weather protection, the device is suitable for both outdoor and indoor mounting where reliable detection and automatic control of lighting or other systems are required. The sensor combines a wide detection range with adjustable sensitivity and installation flexibility to support hands-free activation and contribute to energy-efficient building operation.

Advantages

The SensIQ S offers a long detection range of up to 20 m and stable performance in varied weather conditions thanks to its IP54-rated enclosure. It supports presence detection as well as motion detection, enabling more precise control of lighting and automation. The compact design and adjustable settings simplify integration into existing installations and allow installers to adapt the sensor to specific mounting heights and detection zones.

Suitable for

• Outdoor building entrances, porches and walkways
• Large indoor spaces such as halls, corridors and stairwells
• Lighting control for energy-saving automation
• Security system activation and perimeter monitoring

Key specifications

• Detection type: combined motion and presence detection
• Maximum detection range: up to 20 metres
• Environmental protection: IP54-rated housing for dust and water splash resistance
• Mounting options: wall or ceiling installation with adjustable orientation
• Adjustable sensitivity and time delay settings for tailored response
• Power supply and switching compatibility with standard lighting circuits (observe local electrical codes)

How to use

Mount the sensor at the recommended height and orient it toward the monitored area to ensure the coverage matches the required detection zone. Configure sensitivity, presence/motion modes and time delay according to the installation needs. Wire the device into the lighting or control circuit following the manufacturer’s wiring diagram and local safety regulations. After installation, test detection across the entire coverage area and fine-tune settings to avoid unwanted triggers while ensuring reliable activation.

Recommendations

For consistent detection performance, install the SensIQ S on a stable surface, avoid pointing the sensor directly at heat sources or reflective surfaces, and perform adjustment tests at different times of day. Use presence mode for longer, low-motion occupancy detection and motion mode where short-term movement triggers are required. Regularly inspect the enclosure for debris buildup to maintain IP54 protection.