Sensor de temperatura testo 0628 7533 — Sonda tipo K, rango de medición −50 a +205 °C

Temperature sensor testo 0628 7533 is a Type K thermocouple probe designed for contact temperature measurements in industrial and HVAC environments. The probe covers a measuring range from −50 to +205°C and is intended for use with compatible testo meters and data loggers to deliver fast response and repeatable readings for routine checks, maintenance and process monitoring.

Advantages

This Type K probe offers a wide measurement range suitable for low-temperature and medium-high temperature applications, ensuring versatility across multiple tasks. The sensor provides rapid response to temperature changes and stable output when connected to appropriate testo instruments, facilitating efficient measurement workflows. The probe’s construction is geared toward reliable contact measurements with consistent performance in field and service conditions.

Suitable for

• Routine HVAC inspections and system diagnostics
• Maintenance checks on refrigeration and heating equipment
• Process monitoring where contact temperature measurement is required
• Field measurements in workshops and industrial maintenance

Key specifications

• Sensor type: Type K thermocouple
• Measuring range: −50 to +205°C
• Measurement method: Contact temperature measurement
• Response: Fast response suitable for spot checks and routine monitoring
• Compatibility: Designed for use with compatible testo meters and data loggers

How to use

Connect the Type K probe to a compatible testo meter or data logger following the instrument manufacturer’s connection instructions. Position the probe in direct contact with the surface or medium to be measured, allowing sufficient time for the reading to stabilise. For repeated measurements, ensure good thermal contact and avoid rapid displacements that can cause transient readings. After use, disconnect the probe and store it according to the instrument and probe care guidelines.

Recommendations

For reliable results, verify compatibility between the probe and the measuring device, check calibration status periodically, and ensure the probe tip is clean and undamaged. Avoid exposing the probe to temperatures outside the specified range and protect the cable and connector from mechanical stress to maintain measurement accuracy.