SFP de fibra óptica BlueOptics USFP-GB/EX-D-R-BO 120000 m aluminio

The BlueOptics USFP-GB/EX-D-R-BO 120000 m Aluminium is a single‑mode fiber optic SFP transceiver module designed for long‑distance gigabit Ethernet links. Built in an aluminum housing and weighing approximately 20 g, this module supports 1000BASE‑ZX operation with LC duplex connectors and optical transmission over distances up to 120 km. It implements a 1550 nm transmitter and receiver for reliable optical data transport and conforms to MSA form‑factor and electrical interface expectations for SFP ports.

Advantages

This BlueOptics SFP offers long reach capability suitable for metropolitan and inter‑site links while maintaining a compact SFP form factor that fits standard network switches, routers and storage systems. The aluminum housing provides physical durability and thermal stability, and the module is produced to meet MSA compatibility, enabling interoperability with equipment that supports the original Raisecom USFP‑Gb/EX‑D‑R 1000BASE‑ZX transceivers. Integrated digital diagnostics (DDM/DOM) support allows remote monitoring of key operational parameters when supported by host hardware.

Suitable for

Key specifications

How to use

Insert the SFP transceiver into a compatible SFP port on a switch, router or other network device while the device is powered according to the vendor instructions. Connect LC duplex single‑mode fiber patch cords to the transceiver, observing correct Tx/Rx orientation. Configure the host interface for 1000BASE‑ZX operation if required by your equipment; many systems will auto‑negotiate or recognize the module automatically. If digital diagnostics are needed, enable or access the DDM/DOM readout through the host device management interface, provided the host supports the feature.

Recommendations

For optimal performance, use high‑quality single‑mode fiber and low‑loss LC connectors, keep fiber ends clean, and follow bend‑radius recommendations. Verify host device compatibility with 1000BASE‑ZX transceivers and confirm DDM/DOM support if remote monitoring is required. For critical links, test the transceiver in your specific hardware to confirm full interoperability.