Sierra circular Scheppach PL55, 1200 W, 230 V, disco Ø160 mm, 24 dientes, profundidad de corte 49,5 mm (90°), basculante, madera

The Scheppach PL55 is a compact, mains-powered saw intended for cutting wood. Driven by a 1200 W motor, it uses a 16 cm diameter blade and is capable of an idle speed up to 9,500 RPM. The machine delivers a maximum cutting depth of 4.95 cm at a 90° angle and combines a small footprint—270 mm wide, 720 mm deep, 260 mm high—with build quality originating from Germany.

Advantages

The combination of a 1200 W motor and a high spindle speed provides consistent cutting performance for a range of woodworking tasks. Its compact dimensions make the unit suitable for limited workshop space and easier handling during positioning and storage. The 16 cm blade diameter and nearly 5 cm cutting depth at 90° allow for accurate crosscuts and straight cuts in typical softwoods and many hardwood applications within the specified depth. Design and manufacturing in Germany contribute to dimensional stability and component quality.

Suitable for

Key specifications

How to use

Before operation, mount a blade suitable for the intended wood type and ensure the machine is disconnected from the mains while changing accessories. Secure the workpiece and set the fence or guide to the required position. Start the saw and allow it to reach full idle speed before engaging the material, then feed the workpiece steadily to achieve a straight, controlled cut. After finishing, switch off the saw and wait for the blade to stop completely before removing offcuts or performing adjustments.

Recommendations

Use personal protective equipment such as safety glasses and hearing protection. Select a blade with the correct tooth geometry for the wood species to improve cut quality and reduce load on the motor. Maintain the tool by keeping the blade clean and sharp, and check guards and mounting connections regularly. Avoid forcing oversized workpieces beyond the saw’s maximum cutting depth.