Soporte de monitor SpeaKa Professional SP-6444404

Short joint arm designed to save space with an extra-level distance to the wall of 5 cm. The Monitor Mount SpeaKa Professional SP-6444404 supports TFT/LCD screens with VESA hole patterns 75 x 75 mm and 100 x 100 mm and fits screens from 33 cm (13") to 76.2 cm (30") with a maximum load capacity of 23 kg. Tilt and pan ranges depend on the screen size and mounting distance from the wall.

Advantages

The mount provides a compact wall distance of 5 cm to reduce protrusion and free up desk space. It offers tilt adjustment and lateral movement (left/right) of approximately 180° and tilt up/down up to about 45°, within the limits imposed by screen size and mounting geometry. Compatible with standard VESA 75 x 75 and 100 x 100 mounts and finished in a neutral silver color.

Suitable for

• Home and office monitors with VESA 75 x 75 mm or 100 x 100 mm
• Screens from 33 cm (13") to 76.2 cm (30")
• Installations requiring a compact wall mounting with minimal gap
• Setups needing moderate tilt and swivel adjustment

Key specifications

• Model: SpeaKa Professional SP-6444404
• Supported screen sizes: 33 cm (13") – 76.2 cm (30")
• Maximum load: 23 kg
• VESA compatibility: 75 x 75 mm and 100 x 100 mm
• Wall distance: 5 cm (when folded)
• Tilt range: approximately -15° to 15° (manufacturer data) — tilt/up to about 45° may be possible depending on screen
• Pan/swing: up to about 180° (dependent on screen size and installation)
• Color/finish: silver
• MPN: SP-6444404
• EAN: 4016139334806

How to use

Attach the mount to a solid wall following local building codes and using appropriate anchors for the wall material. Fasten the VESA plate to the back of your monitor using the matching screw pattern (75 x 75 mm or 100 x 100 mm). Hang the monitor on the wall arm and secure any safety screws or locks. Adjust tilt and swivel within the available range to achieve the desired viewing angle, taking into account the screen size and clearance.

Recommendations

Ensure the wall and fixings support the combined weight of the mount and monitor (maximum 23 kg). Verify VESA hole pattern and use correct screw sizes. Avoid forcing the arm beyond its natural movement limits to prevent damage.