Soporte de suelo VESA personalizable Compulocks para pantallas de hasta 32" Blanco

This large plate add-on for the Compulocks Brandable VESA Floor Stand allows larger and heavier screens to be used while retaining a free‑standing configuration. The accessory supports screens up to 32 inches and provides added stability for displays mounted on the BrandMe/Compulocks stand. The product is finished in white to match the Compulocks Brandable VESA Floor Stand model 140WLBPW.

Advantages

The plate increases the maximum supported screen weight and broadens compatibility to larger displays without altering the stand’s freestanding setup. It is brandable: the floor stand enclosure includes space for a custom graphic panel so you can add logos or messages. The package includes graphic panel specifications to enable printing at an external print shop.

Suitable for

• Trade shows and exhibitions where a branded, freestanding display is required
• Retail environments for promotional signage with a mounted screen
• Reception areas or lobbies needing a stable, branded digital display
• Home or office use when a larger 32" screen must be mounted securely

Key specifications

• Plate weight: 2.450 kg (5.3 lb)
• Maximum screen size: 32 inches
• Maximum screen weight: 9 kg (19.8 lb)
• Graphic panel outer width: 6.0 in / 15.24 cm
• Graphic panel outer height: 34.75 in / 88.26 cm
• Maximum artwork width: 5.0–5.25 in / 12.7–13.34 cm
• Maximum material thickness: 0.250 in / 6.35 mm (or two pieces of 0.125 in / 3.18 mm back to back)

How to use

Attach the plate add-on to the Compulocks Brandable VESA Floor Stand according to the stand’s assembly instructions, then mount a compatible VESA screen (up to 32" and 9 kg). Install the graphic panel into the stand enclosure following the provided panel dimensions and material thickness limits. If using printed graphics, have the artwork printed to the specified maximum artwork width and cut to the graphic panel outer dimensions before inserting.

Recommendations

Ensure the mounted screen does not exceed the specified 9 kg weight limit and 32" diagonal; verify material thickness for the graphic panel does not exceed 0.250" (or use two 0.125" pieces) to ensure proper fit and secure installation.