SSD 2,5" AFOX SD250-240GN 240 GB SATA III TLC, 555/510 MB/s, 75k/70k IOPS

AFOX SD250-240GN is a 2.5" SATA III solid-state drive with 240 GB of TLC NAND flash memory. It offers sequential read speeds up to 555 MB/s and sequential write speeds up to 510 MB/s, with random 4KB performance rated at up to 75,000 IOPS for reads and 70,000 IOPS for writes. The drive is designed for use in PCs and laptops, has an MTBF of 2,000,000 hours, and operates in ambient temperatures from 0 to 70 °C. Physical dimensions are 69.9 × 100 × 6.8 mm; the unit requires protection from moisture.

Advantages

The SSD provides fast sequential and random access suitable for system and application storage, a compact 2.5" form factor compatible with most notebooks and desktops, and a long rated MTBF for reliability. Using TLC memory balances cost and capacity for general-purpose storage needs while maintaining SATA III performance.

Suitable for

Key specifications

How to use

Install the AFOX 2.5" SATA SSD into a compatible 2.5" drive bay or mounting bracket in a desktop or into the notebook’s SATA slot. Connect to the motherboard using a SATA III data cable and to power via the standard SATA power connector. Initialize, partition and format the drive in your operating system before use. For best performance, ensure the SATA port is set to AHCI mode in BIOS/UEFI and use the latest chipset and storage drivers.

Recommendations

Protect the drive from moisture and avoid operating outside the specified 0–70 °C temperature range. Use proper static handling when installing the SSD and keep firmware and system drivers up to date to maintain performance and compatibility.