Steinel Detector de presencia IR EB PD IR4360-8, montaje en techo, 360°, blanco 085100

The Steinel IR4360-8 stands out with its 360° detection pattern and separate presence and motion zones, making it a precise choice for ceiling-mounted lighting control in offices, corridors, and restrooms. Unlike basic motion sensors, it distinguishes between fine movements directly beneath the sensor and larger movements across the room, reducing false triggers while maintaining reliable switching.

Highlights

• Passive infrared sensor with 360° coverage for complete room monitoring
• Presence detection area of Ø 3 m and motion detection area of Ø 8 m at 2.8 m mounting height
• Adjustable time delay from 30 seconds to 30 minutes and light threshold from 10 to 1000 lux
• Supports resistive loads up to 2000 W and LED loads up to 500 W
• Flush ceiling installation with a discreet white housing

In daily use

Once installed at a height between 2.5 and 3.5 metres, the detector automatically switches lighting on when movement is detected and off after the set delay. The light response threshold can be tuned so the sensor only activates when natural light falls below your chosen level, saving energy during daylight hours. An optional push-button can be connected for manual override, giving you direct control when needed.

Full specifications

• Sensor type: Passive infrared (PIR)
• Detection angle: 360°
• Presence detection area: Ø 3 m at 2.8 m installation height
• Motion detection area: Ø 8 m at 2.8 m installation height
• Recommended installation height: 2.5 - 3.5 m
• Time setting: 30 sec - 30 min
• Light response threshold: 10 - 1000 lux
• Power supply: 230 V AC, 50/60 Hz
• Max. switching capacity (resistive load): 2000 W
• Max. switching capacity (LED load): 500 W
• Power consumption: 0.5 W
• IP rating: IP20
• Operating temperature: -20 to +50 °C
• Housing material: UV-resistant plastic
• Colour: White
• Mounting type: Ceiling, flush-mount
• Manual override: Yes (via optional push-button)

Final note

The IR4360-8 is a dependable presence detector for indoor applications where precise, energy-efficient lighting control is required.