Switch no gestionado Intellinet 5 puertos 2.5G Ethernet PoE+ 55W

The Intellinet Unmanaged Switch 5-Port 2.5G Ethernet PoE+ 55W provides five RJ-45 multi-gigabit ports supporting 10/100/1000/2500 Mbps and supplies Power over Ethernet (IEEE 802.3at) to connected devices. Designed for desktop or wall-mount installation, the switch offers a 55W PoE budget and mixes PoE and non-PoE devices without additional configuration, making it suitable for small networks that need higher-than-gigabit bandwidth and centralized power delivery.

Advantages

This unmanaged PoE+ switch delivers multi-gigabit throughput up to 2.5 Gbps on all ports while providing up to 30 W per PoE+ port under the IEEE 802.3at standard, with a total PoE budget of 55 W. The device removes the need for separate power supplies for compatible endpoints, reduces cable clutter, and includes protection against short circuits, overloads, and high-voltage conditions. Its unmanaged design requires no configuration and supports quick deployment.

Suitable for

• Powering Wi‑Fi 6 (802.11ax) access points and other high‑bandwidth wireless APs
• Supplying VoIP phones, IP cameras, and network bridges
• Small office or branch networks needing multi‑gigabit uplinks

Key specifications

• Ports: 5 × RJ-45 (2.5G Ethernet supporting 10/100/1000/2500 Mbps)
• Switch type: Unmanaged
• PoE standard: IEEE 802.3at (PoE+), up to 30 W per port
• Total PoE budget: 55 W
• Mounting: Desktop or wall-mount
• Brand / MPN / EAN: INTELLINET / 561921 / 0766623561921

How to use

Place the switch on a stable surface or mount it on a wall using appropriate screws. Connect your router or uplink device to any port with a Cat5e or Cat6 cable to provide network connectivity. Plug PoE-capable devices (access points, IP phones, cameras) into the switch ports; the switch will automatically detect and supply power to IEEE 802.3af/at-compliant devices. Non‑PoE devices can be connected to any port for data only. Ensure the total connected PoE load does not exceed the 55 W budget.

Recommendations

Use Cat5e or Cat6 cables for full 2.5G performance, distribute PoE-powered devices so the total power draw stays within the 55 W budget, and place the switch in a ventilated area free from direct heat sources to ensure reliable operation.