SYNERGY21 LED Flex Strip COB SWW DC24V 40W CRI>90 SLIM V2 IP20 5m

Uneven lighting and visible LED dots can ruin the clean look of coves, under-cabinet spaces, and display shelves. The SYNERGY21 LED Flex Strip COB SWW solves this with Chip-on-Board technology, delivering a seamless, dot-free line of super warm white light. With a high CRI above 90, colours appear natural and true, making it ideal for residential and commercial accent lighting where quality matters.

Who is it for

Interior designers, electricians, and DIY enthusiasts who need reliable, high-quality linear lighting for indoor applications. Perfect for kitchen under-cabinet lighting, cove lighting, shelf illumination, and architectural accents in homes, retail displays, and hospitality settings.

Main features

• COB LED technology for uniform, dot-free illumination
• Super warm white light (2700K–3000K) for a cozy, inviting atmosphere
• High colour rendering (CRI >90) ensures vivid, natural colours
• Low voltage DC 24V operation for safety and compatibility with dimmers
• 5-metre reel with 3M adhesive backing for easy installation
• Cuttable at marked intervals for custom lengths
• IP20 rating for indoor use only
• Long lifespan up to 50,000 hours

Specifications

• LED technology: COB (Chip-on-Board)
• Light colour: Super Warm White (SWW)
• Colour temperature: 2700K – 3000K
• Colour rendering index: >90 Ra
• Input voltage: DC 24V
• Total power consumption: 40W (8W per metre)
• Luminous flux: approx. 800–1000 lm/m
• Beam angle: 120°
• Strip width: 8mm
• Dimmable: Yes (requires compatible dimmer)
• Cuttable: Yes, at marked intervals
• Adhesive backing: 3M self-adhesive
• Lifespan: up to 50,000 hours
• Operating temperature: -20°C to +45°C
• IP rating: IP20
• Product series: SLIM V2

Tips

For best adhesion, clean the mounting surface with isopropyl alcohol before applying the strip. Use an aluminium profile as a heat sink to extend LED life and improve light distribution. Pair with a compatible 24V dimmer to adjust brightness and set the desired mood. Always check the marked cutting points to avoid damaging the circuit.