Taco basculante Fischer 50326 180 mm M10 25 unidades

The Fischer toggle bolt 180 mm M10 is a fastening element intended for secure installation in plasterboard and hollow-wall substrates. The assembly consists of a metal toggle that opens behind the board to distribute load and a threaded rod with M10 connection. With a total screw length of 180 mm and a recommended drill hole diameter of 30 mm, this pack of 25 pieces provides a consistent solution for medium-duty applications where a reliable anchor point is required.

Advantages

The design of the toggle provides a wide bearing surface behind the plasterboard, reducing the risk of pull-out and offering stable load distribution. The M10 thread ensures compatibility with commonly used fittings and fixtures. Supplied in a quantity of 25, the set supports multiple installations and reduces the need for frequent reordering. The metal construction is suitable for repeated tightening and provides durable mechanical performance in hollow-wall mounting applications.

Suitable for

• Mounting shelves and lightweight cabinets on plasterboard partitions
• Fixing brackets, handrails and curtain rails in hollow walls
• Securing fixtures such as lights, mirrors and decorative elements
• Temporary or semi-permanent installations that require removable fastenings

Key specifications

• Fastener type: metal toggle bolt for hollow-wall installation
• Total screw length: 180 mm
• Thread connection: M10
• Recommended drill hole diameter: 30 mm
• Pack quantity: 25 pieces

How to use

Drill a 30 mm diameter hole through the plasterboard at the chosen mounting point. Insert the folded toggle through the hole, push it forward until it opens fully behind the board, then pull back gently to seat the toggle against the reverse side. While maintaining tension, rotate and tighten the M10 threaded screw until the fixture is held firmly against the wall. If necessary, adjust the screw length or use washers to achieve the correct spacing for the mounted object.

Recommendations

Verify the substrate condition before installation and ensure the plasterboard thickness and void depth are adequate for a 180 mm toggle. For heavy loads or safety-critical fixings, use multiple fasteners and follow local building regulations or consult a structural professional. Use appropriate tools and personal protective equipment during drilling and installation.