Team Group GROUP MODULO MEMORIA RAM DDR5 16GB 5200MHz ELITE+ (TPBD516G5200HC4201) - 16 GB - DDR5

Team Group ELITE PLUS TPBD516G5200HC4201 is a 16 GB DDR5 desktop memory module (1×16 GB) with a 5200 MHz frequency, ECC support and a standard 288-pin DIMM form factor. The module features a simple, symmetrical heatsink designed for DDR5 that provides scratch resistance, acid resistance, anti-corrosion properties and electrical non-conduction, offering comprehensive protection for the memory module while remaining compatible with Intel and AMD DDR5 platforms.

Advantages

The ELITE PLUS DDR5 module delivers higher transfer rates compared with typical DDR4 modules, enabling improved multitasking and bandwidth-intensive workloads. It operates at a lower standard voltage (1.1 V) than DDR4, reducing power consumption, and includes an onboard power management IC to stabilize power delivery and minimize noise. On-die ECC corrects DRAM errors for enhanced data transmission stability, and the optimized internal structure increases bank count and burst length to process larger data volumes more efficiently. The available capacities and channel configurations allow flexible upgrades from 8 GB up to single-module sizes defined by JEDEC.

Suitable for

• Desktop workstations and PCs requiring ECC-protected DDR5 memory
• Content creation and multitasking with higher bandwidth demands
• System upgrades on Intel and AMD DDR5-compatible motherboards
• Environments where stability and reduced power consumption are important

Key specifications

• Model: Team Group ELITE PLUS TPBD516G5200HC4201
• Capacity: 16 GB (1×16 GB)
• Memory type: DDR5, ECC
• Clock speed: 5200 MHz
• Voltage: standard 1.1 V (DDR5)
• Form factor: 288-pin DIMM
• Heatsink: symmetrical plain-design with scratch/acid/anti-corrosion and non-conductive treatment
• Compatibility: Intel and AMD DDR5 platforms
• EAN: 765441663961

How to use

Power off the PC and disconnect from mains before installation. Install the module into an available 288-pin DDR5 DIMM slot on a compatible Intel or AMD motherboard, ensuring the notch aligns with the socket key and the module clicks into place. After assembly, enter the system BIOS/UEFI to verify that the memory is recognised and ECC is enabled if required. Follow your motherboard manual for enabling XMP/metadata profiles or adjusting memory settings if necessary.

Recommendations

For stable operation, use this ECC DDR5 module on motherboards that explicitly support DDR5 ECC and consult the motherboard QVL for compatibility. Maintain proper airflow around the module and avoid direct contact with the heatsink surface to preserve the protective treatment.