Tira LED EUROLITE 50530105 5 m 3000K 24V

LED strip EUROLITE 50530105 is a flexible 5 m warm-white lighting tape with a color temperature of 3000K and 24V operating voltage. The strip provides continuous warm white illumination suitable for accent and task lighting. It is designed for mounting on clean, dry surfaces and can be cut at marked intervals to fit custom lengths. Use with a compatible 24V power supply and appropriate connectors for safe and stable operation.

Advantages

The EUROLITE LED strip delivers consistent warm white light along its entire length and is flexible enough to follow straight runs and shallow curves. Its 24V operation reduces voltage drop over longer runs compared with lower-voltage alternatives, helping to maintain uniform brightness. The strip is easy to install on prepared surfaces and can be trimmed at indicated cut points for custom installations. Low-profile construction enables discreet integration into cabinets, displays, coves and signage.

Suitable for

Key specifications

How to use

Prepare the mounting surface by ensuring it is clean, dry and free of dust or grease. Measure and cut the strip only at the designated cut marks to achieve the required length. Connect the strip to a compatible 24V DC power supply using suitable connectors and observe polarity. Secure the strip to the surface using the integrated adhesive backing or recommended mounting clips where adhesion is insufficient. For runs longer than a single strip or for parallel segments, plan power injection points to maintain even brightness and consult wiring guidelines for safe current distribution.

Recommendations

Use a correctly rated 24V power supply with adequate current capacity for the total length. Avoid exposing the strip to moisture unless it is installed in a suitable sealed profile or has an appropriate IP rating. When installing in enclosed profiles, allow for heat dissipation and avoid covering the strip with insulation. For cut and reconnected sections, protect soldered or crimped joints and insulate exposed conductors. For permanent installations, follow local electrical codes and consider professional installation.