Tira LED EUROLITE 50530112, 5 m, SMD3528, 5700K luz de día, 12V

EUROLITE 50530112 LED strip is a 5 m flexible light strip built with SMD3528 diodes and designed for 12 V systems. It emits a daylight‑balanced color temperature of 5700 K, providing neutral white illumination suitable for accent, task or decorative lighting. The strip delivers continuous, even light along its length and can be mounted in aluminum profiles or directly onto clean, dry surfaces when correct power and mounting conditions are met. Intended for indoor use, the product requires a compatible 12 V DC power supply and simple cutting at marked intervals for custom lengths.

Advantages

The LED strip provides consistent, flicker‑free illumination with a neutral daylight color that supports accurate color rendering for displays and work areas. Its SMD3528 diodes offer low heat generation and energy efficiency compared with traditional bulbs. The flexible construction allows for linear runs and gentle curves, while the 5 m length reduces the need for multiple connections. Installation is straightforward with adhesive backing or mounting into profiles, and the 12 V operating voltage is compatible with common low‑voltage lighting systems.

Suitable for

Key specifications

How to use

Measure the installation run and, if necessary, cut the strip only at the marked cutting points to achieve the required length. Ensure the mounting surface is clean, dry and free of dust or oil before applying the adhesive backing or placing the strip in an aluminum profile. Connect the strip to a compatible 12 V DC power supply, observing polarity and recommended current capacity. For runs longer than the recommended maximum length for a single feed, use multiple supply connection points or adequate power distribution to avoid voltage drop and uneven brightness. Follow local electrical regulations and, if unsure, consult a qualified electrician for wiring and power supply selection.

Recommendations

For best long‑term performance, operate the LED strip within the specified 12 V range, avoid exposure to moisture unless using an IP‑rated protected version, and plan power feeds to minimize voltage drop over long runs. Use an appropriate constant voltage LED driver with sufficient amperage and include a dimmer or controller compatible with 12 V strips if variable brightness is required.