Transceptor de fibra óptica BlueOptics SPG-DR-FX-CDFC-BO 155 Mbit/s SFP 1310 nm

The BlueOptics SPG-DR-FX-CDFC-BO 155 Mbit/s SFP 1310 nm is a compact fiber optic transceiver module designed for point-to-point and short- to medium-distance optical links. Housed in a durable metal casing and weighing only 2 g, this SFP module supports an interface type SFP and a maximum data transfer rate of 155 Mbit/s at a wavelength of 1310 nm. It requires a 3.3 V input and meets RoHS environmental standards, making it suitable for installation in compatible network equipment that accepts SFP form-factor modules.

Advantages

The module's metal housing ensures mechanical robustness and effective thermal conduction while its small SFP form factor saves space in network chassis and switches. Operated at 1310 nm, it provides stable optical transmission for common multimode or single-mode fiber deployments within the module's supported distance range. Compliance with RoHS indicates the component is manufactured without certain hazardous substances, and the low weight simplifies handling and installation during upgrades or replacements.

Suitable for

• Replacing or upgrading SFP ports in routers, switches and media converters
• Establishing short- to medium-range fiber links at 155 Mbit/s
• Industrial and office networking environments requiring a compact transceiver

Key specifications

• Form factor: SFP (Small Form-factor Pluggable)
• Wavelength: 1310 nm
• Maximum data transfer rate: 155 Mbit/s
• Power supply: 3.3 V input requirement
• Construction: metal housing
• Color: silver
• Weight: 0.002 kg
• Standards: RoHS compliant

How to use

Before installing, power down the networking device or follow hot-swap procedures specified by the device manufacturer. Insert the SFP transceiver into an empty SFP slot until it seats firmly and the retention latch engages. Connect the fiber optic cable with the appropriate connector to the transceiver's optical interface and verify correct cable type and polarity. After powering the device, check link and activity indicators on the host equipment and confirm link operation through the device management interface.

Recommendations

Handle the transceiver by its metal casing and avoid touching the optical interface. Keep dust caps on when the module is not connected. Use compatible SFP-capable equipment and verify optical link parameters such as fiber type and loss budget to ensure reliable 155 Mbit/s operation at 1310 nm.