Cuenta Contacto
Tu carrito
Envío con DPD y FedEx
¿Dudas? Pregunte a la IA

Transceptor SFP BlueOptics A1PN-BO, LC-Duplex, 1000BASE-LX, monomodo 1310nm, 10 km, DDM

Transceptor SFP BlueOptics A1PN-BO, LC-Duplex, 1000BASE-LX, monomodo 1310nm, 10 km, DDM
Transceptor SFP BlueOptics A1PN-BO, LC-Duplex, 1000BASE-LX, monomodo 1310nm, 10 km, DDM
42,01 €
BlueOptics A1PN-BO SFP transceiver is a single‑mode 1000BASE‑LX module designed for standard Gigabit Ethernet fiber links. It uses an LC duplex connector and transmits at 1310 nm to support data transport over distances up to 10 km. The module includes Digital Diagnostic Monitoring (DDM) for real‑ti... Leer más
Stock 1114 Código 2356509 Marca BLUEOPTICS Modelo A1PN-BO Garantía 2 años

Envíos y devoluciones

Entrega estimada Martes, Octubre 27
Te mantendremos informado a través de nuestro sistema de seguimiento detallado
Opciones de pago
Tarjeta bancariaVisaMastercardPayPalApple PayGoogle PayTransferencia bancaria

BlueOptics A1PN-BO SFP transceiver is a single‑mode 1000BASE‑LX module designed for standard Gigabit Ethernet fiber links. It uses an LC duplex connector and transmits at 1310 nm to support data transport over distances up to 10 km. The module includes Digital Diagnostic Monitoring (DDM) for real‑time monitoring of optical parameters and operates across an industrial temperature range of 0°C to +70°C. It is intended for installation in network switches, routers and media converters that accept SFP LX optics.

Advantages

This SFP transceiver provides stable 1 Gbps fiber connectivity over single‑mode cabling with an LC duplex interface and a 10 km reach, making it suitable for campus and metro links. Integrated DDM enables monitoring of optical power, temperature and bias current, which assists in diagnostics and maintenance. The module’s standard SFP form factor ensures broad compatibility with devices that support 1000BASE‑LX SFP optics and allows hot‑swappable replacement without powering down equipment.

Suitable for

Key specifications

How to use

Insert the SFP transceiver into a compatible SFP port on your switch, router or media converter until it clicks into place. Connect LC duplex single‑mode fiber patch cords with correct TX/RX orientation. Verify link status on the host device and, if supported, read DDM parameters through the device management interface to confirm optical power and module health. For hot‑swap replacement, remove the module using the release mechanism and insert the replacement while the system remains powered, following your equipment vendor’s guidelines.

Recommendations

Use single‑mode fiber of appropriate quality and adhere to correct connector polishing and cleanliness practices to maintain low insertion loss. Check compatibility notes of the host equipment regarding supported SFP modules and enable DDM monitoring where available to track signal levels and module parameters for proactive maintenance.

Aspectos destacados
  • Connecting switches and routers over single‑mode fiber for distances up to 10 km
  • Media converters and access devices requiring 1000BASE‑LX SFP modules
  • Campus backbone and point‑to‑point links between buildings
  • Environments that require remote optical monitoring via DDM
  • Optical standard: 1000BASE‑LX
  • Wavelength: 1310 nm
  • Cable type: Singlemode fiber
  • Connector: LC duplex
  • Maximum reach: 10 km
  • Form factor: SFP (hot‑swappable)
  • Digital diagnostics: DDM (optical power, temperature, current)
  • Operating temperature range: 0°C to +70°C
  • Data rate: 1 Gbps
Historial de precios de los últimos 6 meses
Transceptor SFP BlueOptics A1PN-BO, LC-Duplex, 1000BASE-LX, monomodo 1310nm, 10 km, DDM
Actual
42,01 €
Mínimo
40,62 €
Máximo
42,01 €
Variación 24 h
+0,55 €   +1%
Semana
+1,10 €   +3%
Mes
+1,16 €   +3%

Productos populares en esta categoría

Hola, soy el asistente de IA de DistriNode. Puedo ayudarte a encontrar productos, comparar opciones, crear presupuestos en PDF o abrir solicitudes de soporte.